Cyberpower pr2200elcdrt2u [7/12] Battery replacemen continued

BATTERY REPLACMENT PROCEDURE:

REMINDER! The used batteries are hazardous wastes and must be disposed through recycling. Most retailers

that sell lead-acid batteries collect used batteries for recycling, as required by the local regulations.

6. Put the new battery packs back into the

compartment. Tighten up the screws and

replace the cable protection cover and the

front panel. Recharge the unit for 8 hours

to ensure the UPS performs expected

runtime.

1. Remove the front panel

on the right side.

2. Remove the two retaining screws

of the cable protection cover then

remove the cover.

3. Remove the two retaining

screws of the cable connectors.

5. Remove the three retaining

screws.

4. Disconnect the black wire and red

wire from the battery.

BATTERY REPLACEMEN (continued)