Fliker f3, 140мм, черный [6/32] Caring for your yfliker

Caring for your YFliker

1. After you have used the scooter for a week or two, the wheels will need to be

checked to ensure they are still in perfect working order. To do so rotate the

bearings and wheels and check if any lubrication or adjustments are needed.

2. Please do not use plastic to cover your scooter if it is being stored or trans-

ported as this may damage the ﬁnish. DO NOT use a wet cloth, alcohol, indus-

trial cleaners or solvents to clean the scooter as this may result in loss of gloss,

the removal of decals or dissolve the materials in the scooter. If the scooter

loses its gloss a small bit of car wax can be used to polish the scooter.

3. In normal circumstances it is recommended that you disassemble, clean and

lubricate the scooter every 6 months. Please take extreme care to ensure the

scooter is reassembled correctly.

4. If the front fork, wheels and/or rear support frame are not correctly tightened

you can use a wrench to tighten the bolts correctly. Please ensure to not over

or under tighten the bolts.

5. Due to normal wear and tear the PU wheels and bearings may need to be

replaced after some time. Please contact the place of purchase for new wheels.

DO NOT use parts designed for other scooters, the use of anything other than

Fliker parts may aect your safety.

6. If the brake cable becomes lose, please screw out the bolt and nut on the brake

gear and pull the brake cable out with a clamp. Reposition the brake cable so

that it is tense and screw the bolt and nut onto the brake gear all the while

keeping the cable taut.

7. Over time the nuts and bolts may become loose, please check that all nuts and

bolts are suciently tightened before each use of your scooter.

NOTE: Please read this manual carefully and keep it for future reference. The

dealer will not take responsibility if the scooter is used in a manner for which is

was not intended or if all warnings which are stated in the manual are not

followed.

IMPORTANT NOTICE TO PARENTS

This manual contains important information relating to your child’s safety, it is your

responsibility to review this information with your child and make sure they are

fully aware of all the information and warnings within the manual. Please carefully

read this manual before you commence assembly of this scooter and review this

information with young riders before they ride.