![Gigabyte ga-z170-hd3p [11/44] Center subwoofer speaker out jack orange](/img/pdf.png)
Gigabyte ga-z170-hd3p [11/44] Center subwoofer speaker out jack orange
![Gigabyte ga-z170-hd3p [11/44] Center subwoofer speaker out jack orange](/views2/1167924/page11/bgb.png)
HDMI Port
The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM
audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported
resolution is 4096x2160@24 Hz, but the actual resolutions supported are dependent on the monitor
being used.
Center/Subwoofer Speaker Out Jack (Orange)
Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio conguration.
Rear Speaker Out Jack (Black)
This jack can be used to connect rear speakers in a 4/5.1/7.1-channel audio conguration.
Side Speaker Out Jack (Gray)
Use this audio jack to connect side speakers in a 7.1-channel audio conguration.
Line In Jack (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out Jack (Green)
The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to
connect front speakers in a 4/5.1/7.1-channel audio conguration.
Mic In Jack (Pink)
The Mic in jack.
• When removing the cable connected to a back panel connector, rst remove the cable from
your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
• After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
• To set up a triple-display conguration, you must install motherboard drivers in the operating
system rst.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
USB 3.0/2.0 Port
The USB 3.0 port supports the USB 3.0 specication and is compatible to the USB 2.0/1.1 specication.
Use this port for USB devices.
USB 3.1 Type-A Port (Red)
The USB 3.1 Type-A port supports the USB 3.1 specication and is compatible to the USB 3.0/ 2.0/1.1
specication. Use this port for USB devices.
Activity LED
Connection/
Speed LED
LAN Port
Connection/Speed LED:
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
Activity LED:
State Description
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
- 11 -
Содержание
- Ga z170 hd3p 1
- Rev 1003 12me z17hd3p 1003r 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 0 3
- Chapter 3 appendix 7 3
- Ga z170 hd3p motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga z170 hd3p 4
- Ga z170 hd3p motherboard 5 two sata cables 4
- Ga z170 hd3p motherboard layout 4
- Motherboard driver disk 5 i o shield 4
- User s manual 5 one g connector 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 8
- 3 installing the cpu 9
- 4 installing the memory 9
- Dualchannelmemoryconfiguration 9
- Installing the cpu 9
- 5 installing an expansion card 10
- 6 back panel connectors 10
- D sub port 10
- Dvi d port 10
- Ps 2 keyboard mouse port 10
- Usb 2 1 port 10
- Usb type 10
- Center subwoofer speaker out jack orange 11
- Hdmi port 11
- Line in jack blue 11
- Line out jack green 11
- Mic in jack pink 11
- Rear speaker out jack black 11
- Rj 45 lan port 11
- Side speaker out jack gray 11
- Usb 3 2 port 11
- Usb 3 type a port red 11
- 7 internal connectors 12
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 13
- 4 cpu_fan sys_fan1 sys_fan2 sys_fan3 fan headers 13
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 13
- The motherboard has a 4 pin cpu fan header cpu_fan two 4 pin sys_fan1 sys_fan2 and a 3 pin sys_fan3 system fan headers most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 13
- With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 13
- Chipset pleasenotethatanm pciessdcannotbeusedtocreatearaidseteitherwithanm sata ssdorasataharddrive tocreatearaidarraywithanm pciessd youmustsetuptheconfigurationin uefibiosmode refertochapter3 configuringaraidset forinstructionsonconfiguringaraidarray 14
- Chipsetsupportsraid0 raid1 raid5 andraid10 refertochapter3 configuringaraidset forinstructionsonconfiguring araidarray 14
- Each sata express connector supports a single sata express device 14
- Follow the steps below to correctly install an m ssd in the m connector 14
- M2a_32g m socket 3 connector 14
- On the motherboard there are three length adjustment holes for the m ssd select the proper hole for the m ssd to be installed and refasten the screw and nut 14
- Pin no definition 14
- Sata express sata express connectors 14
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 14
- Step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mounting hole for them ssdtobeinstalledandthenscrewthenutfirst 14
- Step 2 slide the m ssd into the connector at an angle 14
- Step 3 press the m ssd down and then secure it with the screw 14
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 14
- Them connectorsupportsm satassdsandm pciessdsandsupportraidconfigurationthroughthe inte 14
- To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sataconfiguration formoreinformation 14
- Ahci mode 15
- Always turn off your computer and unplug the power cord before replacing the battery replacethebatterywithanequivalentone dangerofexplosionifthebatteryisreplacedwith 15
- An incorrect model 15
- Bat battery 15
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 15
- Of the battery the positive side should face up 15
- Or uncertain about the battery model 15
- Raid mode 15
- Replacethebattery 4 plug in the power cord and restart your computer 15
- Suretorefertothesupportedconfigurationsinthetablesbelowaccordingtotheoperatingmodeofyour satacontroller ahcimodeorraidmode 15
- Thebatteryprovidespowertokeepthevalues suchasbiosconfigurations date andtimeinformation inthecmoswhenthecomputeristurnedoff replacethebatterywhenthebatteryvoltagedropstoalow level or the cmos values may not be accurate or may be lost 15
- Use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 15
- Used batteries must be handled in accordance with local environmental regulations 15
- When installing different types of m ssds including sata ssds pcie x4 ssds and pcie x2 ssds be 15
- When installing the battery note the orientation of the positive side and the negative side 15
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or 15
- F_panel front panel header 16
- Spdif_o s pdif out header 16
- F_audio front panel audio header 17
- F_usb30_1 f_usb30_2 usb 3 2 headers 17
- Prior to installing the usb front panel be sure to turn off your computer and unplug the power cord from the power outlet to prevent damage to the usb front panel 17
- Thefrontpanelaudioheadersupportsintelhighdefinitionaudio hd andac 97audio youmayconnect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 17
- Theheadersconformtousb3 2 specificationandcanprovidetwousbports forpurchasingthe optional 3 front panel that provides two usb 3 2 ports please contact the local dealer 17
- Coma serial port header 18
- F_usb1 f_usb2 usb 2 1 headers 18
- Lpt parallel port header 18
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 18
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 18
- Theheadersconformtousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 18
- Add in card 19
- Add in card connector 19
- Clr_cmos clear cmos jumper 19
- Supports a thunderbol 19
- Thb_c thunderbol 19
- This connector is for a gigabyte thunderbol 19
- Tpm trusted platform module header 19
- Usethisjumpertoclearthebiosconfigurationandresetthecmosvaluestofactorydefaults toclear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 19
- You may connect a tpm trusted platform module to this header 19
- 1 startup screen 20
- Chapter 2 bios setup 20
- 2 m i t 21
- Advanced frequency settings 21
- Cpu base clock 21
- Cpu upgrad 21
- Graphics slice ratio 21
- Graphics unslice ratio 21
- Host clock value 21
- M i t current status 21
- Performance upgrade 21
- Advanced cpu core settings 22
- C3 state support 22
- Core current limit amps 22
- Cpu clock ratio 22
- Cpu clock ratio cpu frequency fclk frequency for early power on 22
- Cpu enhanced halt c1e 22
- Cpu flex ratio override 22
- Cpu frequency 22
- Fclk frequency for early power on 22
- Hyper threading technology 22
- Intel r turbo boost technology 22
- No of cpu cores enabled 22
- Power limit tdp watts power limit time 22
- Turbo rati 22
- Uncore frequency 22
- Uncore ratio 22
- Advanced memory settings 23
- Allows you to specify the c state limit for the processor auto letsthebiosautomaticallyconfigurethis setting default auto 23
- C6 c7 state support 23
- C8 state support 23
- Cpu eist function 23
- Cpu thermal monitor 23
- Extremememoryprofile x m p 23
- Memory frequency mhz 23
- Package c state limit 23
- System memory multiplier 23
- System memory multiplier memory frequency mhz 23
- Voltage optimization 23
- Advanced power settings 24
- Advanced voltage settings 24
- Channel a b memory sub timings 24
- Channel interleaving 24
- Cpu vcore loadline calibration 24
- Imc timing settings 24
- Memory boot mode 24
- Memory enhancement settings 24
- Memory multiplier tweaker 24
- Memory timing mode 24
- Profileddrvoltage 24
- Rank interleaving 24
- Vaxg loadline calibration 24
- 1st system fan speed control sys_fan1 connector 25
- Case open 25
- Chipset voltage control 25
- Cpu core voltage control 25
- Cpu fan speed control cpu_fan connector 25
- Cpu system fan fail warning cpu_fan and sys_fan1 2 connectors 25
- Cpu system fan speed 25
- Cpu system temperature 25
- Cpu system temperature warning 25
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 25
- Dram voltage control 25
- Fan speed percentage 25
- Internal vr control 25
- Pc health status 25
- Reset case open status 25
- 2nd system fan speed control sys_fan2 connector 26
- 3dmark01 enhancement 26
- Fan speed percentage 26
- Max link speed 26
- Miscellaneous settings 26
- 3 system information 27
- Access level 27
- System date 27
- System language 27
- System time 27
- 4 bios features 28
- Boot option priorities 28
- Bootup numlock state 28
- Fast boot 28
- Full screen logo show 28
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 28
- Sata support 28
- Security option 28
- Csm support 29
- Lan pxe boot option rom 29
- Network stack driver support 29
- Next boot after ac power loss 29
- Ps2 devices support 29
- Storage boot option control 29
- Usb support 29
- Vga support 29
- Windows 8 10 features 29
- Administrator password 30
- Ipv4 pxe support 30
- Ipv6 pxe support 30
- Network stack 30
- Other pci device rom priority 30
- User password 30
- 5 peripherals 31
- Audio led 31
- Initial display output 31
- Intel platform trust technology ptt 31
- Legacy usb support 31
- Offboardsatacontrollerconfiguration 31
- Onboard lan controller 31
- Usb mass storage driver support 31
- Usb storage devices 31
- Xhci hand off 31
- Aggressive lpm support 32
- Device select 32
- External sata 32
- Hot plug 32
- Intel r bios guard technology 32
- Nvmeconfiguration 32
- Parallel port 32
- Pending operation 32
- Port 0 1 2 3 4 5 32
- Realtek pcie gbe family controller 32
- Sata controller s 32
- Sata mode selection 32
- Sataconfiguration 32
- Security device support 32
- Serial port 1 32
- Superioconfiguration 32
- Tpm 20 interfacetype 32
- Trusted computing 2 32
- 7 chipset 33
- Audio controller 33
- Audio dsp 33
- Dvmt pre allocated 33
- Dvmt total gfx mem 33
- High precision timer 33
- Internal graphics 33
- 8 power management 34
- Ac back 34
- Power on by keyboard 34
- Power on by mouse 34
- Power on password 34
- Dmi link aspm control 35
- Pch aspm 35
- Peg aspm 35
- Platform power management 35
- Power loading 35
- Rc6 render standby 35
- Resume by alarm 35
- Soft off by pwr bttn 35
- 9 save exit 36
- Boot override 36
- Exit without saving 36
- Load optimized defaults 36
- Loadprofiles 36
- Save exit setup 36
- Saveprofiles 36
- 1 configuring a raid set 37
- 1 configuringaraidset 37
- A installing sata hard drive s in your computer 37
- B configuringsatacontrollermodeinbiossetup 37
- Before you begin please prepare the following items 37
- C 1 uefiraidconfiguration 37
- Chapter 3 appendix 37
- Configuringtheonboardsatacontroller 37
- Raid levels 37
- C 2 configuringlegacyraidrom 38
- Installing the operating system 38
- Installing the sata raid ahci driver and operating system 38
- 2 drivers installation 39
- Our commitment to preserving the environment 40
- Regulatory notices 40
- Regulatory statements 40
- Restriction of hazardous substances rohs directive statement 40
- Waste electrical electronic equipment weee directive statement 40
- Weee symbol statement 40
- Canada industry canada ic notices canada avis d industry canada ic 41
- Fcc notice u s a only 41
- Contact us 44
- Gigabyte esupport 44
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 44
Похожие устройства
- Gigabyte ga-b150m-d2v Инструкция по эксплуатации
- Gigabyte ga-h110m-s2hp Инструкция по эксплуатации
- Gigabyte ga-h110m-s2 Инструкция по эксплуатации
- Gigabyte brix gb-bace-3000 Инструкция по эксплуатации
- Gigabyte ga-h110m-s2h Инструкция по эксплуатации
- Gigabyte ga-z170-gaming k3. v1. Инструкция по эксплуатации
- Gigabyte ga-x99-gaming 5p Инструкция по эксплуатации
- Gigabyte ga-x99p-sli Инструкция по эксплуатации
- Gigabyte ga-h170-gaming 3 Инструкция по эксплуатации
- Gigabyte ga-h170-d3h Инструкция по эксплуатации
- Gigabyte ga-h170-hd3 Инструкция по эксплуатации
- Gigabyte ga-b150n phoenix-wifi Инструкция по эксплуатации
- Gigabyte ga-x150-pro ecc Инструкция по эксплуатации
- Gigabyte ga-x170-extreme ecc Инструкция по эксплуатации
- Gigabyte ga-x150m-pro ecc Инструкция по эксплуатации
- Gigabyte ga-x150-plus ws Инструкция по эксплуатации
- Gigabyte ga-x150m-plus ws Инструкция по эксплуатации
- Gigabyte ga-b150m-hd3 Инструкция по эксплуатации
- Gigabyte ga-b150m-d3v Инструкция по эксплуатации
- Gigabyte ga-h110-d3 Инструкция по эксплуатации
Скачать
Случайные обсуждения