Gigabyte ga-x99-gaming 5p [15/128] 3 2 installing the cpu cooler

- 15 -

Hardware Installation

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

1-3-2 Installing the CPU Cooler

RefertothestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Actualinstallationprocessmay

differdependingtheCPUcoolertobeused.Refertotheuser'smanualforyourCPUcooler.)

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 4:

Finally, attach the power connector of the CPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

Step 2:

Place the cooler atop the CPU, aligning the four

mounting screws with the mounting holes on

the ILM.

Step 3:

Use one hand to hold the cooler and the other to

tighten the screws in a diagonal sequence with a

screw driver. Begin tightening a screw with a few

turns and repeat with the screw diagonally opposite

the one you just tightened. Then do the same to

the other pair. Next, fully tighten the four screws.