Gigabyte ga-h110m-s2pv [11/38] 5 installing an expansion card

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

• Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

• Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

USB 2.0/1.1 Port

TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub

connection to this port.

DVI-D Port

(Note)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920x1200@60Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D

connection to this port.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of the

same capacity, brand, speed, and chips be used and installed in the same colored sockets.

The two DDR4 memory sockets are divided into two channels and each channel has one memory socket as

followingj:

Channel A: DDR4_1

Channel B: DDR4_2

The two DDR3 memory sockets are divided into two channels and each channel has one memory socket as

followingk:

Channel A: DDR3_1

Channel B: DDR3_2

j Only for GA-H110M-S2PV

k Only for GA-H110M-S2PV DDR3.

(Note) The DVI-D port does not support D-Sub connection by adapter.

- 11 -