Zyxel UAG4100 [296/617] Session control screen
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zyxel UAG4100 [296/617] Session control screen

Zyxel UAG4100 [296/617] Session control screen
Chapter 25 Security Policy
UAG Series User’s Guide
296
25.3 Session Control Screen
Click Configuration > Security Policy > Session Control to display the Security Policy
Session Control screen. Use this screen to limit the number of concurrent NAT/security policy
sessions a client can use. You can apply a default limit for all users and individual limits for specific
users, addresses, or both. The individual limit takes priority if you apply both.
User This field is not available when you are configuring a to-UAG policy.
Select a user name or user group to which to apply the policy. The security policy is
activated only when the specified user logs into the system and the policy will be disabled
when the user logs out.
Otherwise, select any and there is no need for user logging.
Note: If you specified a source IP address (group) instead of any in the field below, the user’s
IP address should be within the IP address range.
Schedule Select a schedule that defines when the policy applies. Otherwise, select none and the
policy is always effective.
Action Use the drop-down list box to select what the security policy is to do with packets that
match this rule.
Select deny to silently discard the packets without sending a TCP reset packet or an ICMP
destination-unreachable message to the sender.
Select allow to permit the passage of the packets.
Log matched
traffic
Select whether to have the UAG generate a log (log), log and alert (log alert) or not (no)
when the policy is matched. See Chapter 47 on page 534 for more on logs.
UTM Profile Use this section to apply UTM profiles (created in the Configuration > UTM Profile
screens) to traffic that matches the criteria above. You must have created a profile first;
otherwise none displays.
Select by profile to decide whether a log will be generated based on the UTM profile’s
settings. Otherwise, select no to not generate a log for all traffic that matches criteria in the
profile.
Application
Patrol
Select an Application Patrol profile from the list box; none displays if no profiles have been
created in the Configuration > UTM Profile > App Patrol screen.
Content
Filter
Select a Content Filter profile from the list box; none displays if no profiles have been
created in the Configuration > UTM Profile > Content Filter screen.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
Table 131 Configuration > Security Policy > Policy Control > Add/Edit (continued)
LABEL DESCRIPTION

Содержание

Похожие устройства

Скачать