Zyxel IES4005 [2/4] Hw specifications

Zyxel IES4005 [2/4] Hw specifications
ZyXEL
HW Specifications :
IES4005M (Chassis)
Dimension: 440mm(W)*270mm(D)*88mm(H)
- Rack mountable enclosure,
- One slot for power input.
- One slot for fan and dust filter module (force cooling)
- One Slot for MSC uplink card
- Four slots for hot swapping line cards
- All front access with temperature harden design
Power module:
- IES4005M-AC (AC power module)
- IES4005M-DC (DC power module)
Management and Uplink card
- GPON card (MSC1401G)
Two SFP GPON ports (ITU-T G.984 series)
Two transceivers for type C protection
Dying gasp.
G.984.2
G.984.5, Enhancement band for gigabit
capable optical access networks
Interference immunity for wavelengths > 1530 nm
DBA, Rogue protection and DDMI supported
Splitter capability: max 1:64 (depending on OLT)
AES 128 Encryption support in downstream
Maximum of 25 T-CONT support( one for OMCI)
Maximum of 254 GEM ports (1 for multicast GEM)
Maximum of 95 VLAN action rules support
Maximum of TCONT-GEM port mapping by 1:24
Queuing Method: SP or WRR or SP+WRR
GEM port mapping rule: by VLAN and VLAN+Priority
Optical monitoring: Power level, laser current & temp.
- GE card (MSC1002G)
2 ports GE combo with 100/1000M SFP for Fiber
Compliant with IEEE 802.3z, IEEE802.3u
Auto-Negotiation
Auto-MDI/MDI-X
IEEE 802.3x flow control for full-duplex
64-port POTS line card (VOP1164G-61)
Tow champ 64 connectors
Network Signaling Protocol
- ITU-T H.248 version 2
- SIP protocol (REC 3261)
- RFC 3262 Reliability of Provisional Response in SIP.
- RFC 3265 SIP-Specific Event Notification
- SDP (RFC 2327)
- DTMF detection and generation (bi-directional)
- FAX/Modem pass through (T.38) via RTP
Loop Diagnostics : MTL and GR909
Codec : G.711, G.723.1 and G.729
T.38 Fax/Modem signal coding & Fax Relay (G.711 a/µ)
Echo cancellation based on ITU-T G.168 , G.165
Silence detection/suppression and CNG
Voice Activity Detection (VAD)
Caller ID detection
V.21 Fax Tone Detection
5 REN ringing peak power/port (Max 15 REN per system)
Configurable loop impedance (600 Ohm/ 900 Ohm)
Loop current ≥22mA at 1500 M
Support DTMF/Pulse dial tone
SW features
- MAC address management
- CoS
- SPQ & WRR support
- IEEE 802.3x flow control
- Broadcast Storm Control
- IEEEE 802.1s, IEEE 802.1d, IEEE 802.1w
- Support IEEE 802.1Q/1P
- Support untag and tag frames
- VLAN GVRP support
- IP multicasting
- Port Trunking
- Port Security
- Packet Filtering
- Traffic shaping on subscriber port
- DiffServ Code Point (DSCP) to 802.1p priority mapping
32-port ADSL2+ line card (ALC1132G-51)
Two champ 64 connectors
G.992.1 Annex A, G.992.3 and G.992.5 Annex M
G.994.1 G.hs, G.997.1, G.998.1 (G.Bond-ATM) standard
EOC and Overhead Channel Access
the latency path function
Impulse Noise Protection (up to 16 DMT symbol)
configurable Maximum Nominal PSD mask
configurable US/DS max TX/RX power
5
th
order splitter embedded
- Passive element. The telephone service will operate
normally even if the power supply or equipment fail.
SW feature
- Loop diagnostic management (SELT and DELT)
- Power management capability (L0, L2, L3)
- Seamless Rate Adaptation (SRA)
- 8 VPC/VCC per DSL port
- Support UBR, CBR, rt-VBR, nrt-VBR QoS mechanisms
- Support ATM Forum TM 4.0 traffic control mechanism
- Rate limiting per DSL port and per VC
- Support ATM F5 OAM cells (ITU-T Rec. I610)
- Mapping of ATM service type to 802.1p priority mapping
- Support TR-156 phase II
- Support 2-port bonding (ITU-I G.998.1)
Port isolation
Скачать