HP ScanJet G2710 [15/30] Clean the scanner glass

2 Care and maintenance

This section presents information about how to care for and maintain the scanner.

•

Clean the scanner glass

•

Clean the transparent materials adapter (TMA) — HP Scanjet G2710 Photo Scanner

•

Order maintenance and scanner supplies

Occasional cleaning of your scanner helps ensure higher-quality scans. The amount of

care necessary depends upon several factors, including the amount of use and the

environment. You should perform routine cleaning as necessary.

For all care and maintenance procedures required for the scanner, please see the Care

and maintenance section for your scanner in the onscreen Help. In the HP Solution

Center, click Help, and then select the Help section for your scanner model.

Routine cleaning and maintenance should include cleaning the scanner glass and the

transparent materials adapter (TMA).

CAUTION: Avoid placing items that have sharp edges in the scanner. Doing so can

damage the scanner. Before placing an item on the scanner glass, make sure that

the item does not contain wet glue, correction fluid, or other substances that can be

transferred to the glass.

Clean the scanner glass

1. Disconnect the USB cable and power cable from the scanner.

2. Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild glass

cleaner, and dry the glass with a dry, soft, lint-free cloth.

CAUTION: Use only glass cleaner. Avoid abrasives, acetone, benzene, and

carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl

alcohol because it can leave streaks on the glass.

Do not spray the glass cleaner directly on the glass. If too much glass cleaner is

applied, the cleaner could run to the edges and damage the scanner.

3. When you have finished, reconnect the USB cable and power cable to the scanner.

NOTE: For instructions about how to clean the underside of the scanner glass,

visit

www.hp.com/support.

Clean the transparent materials adapter (TMA) — HP

Scanjet G2710 Photo Scanner

Clean the TMA with a dry, soft cloth. If necessary, lightly spray the cloth with glass cleaner

and wipe the TMA.

Care and maintenance 13