Robomow CITY110 [31/54] Settings
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Robomow CITY110 [31/54] Settings

Robomow CITY110 [31/54] Settings
31
Figure 2.8
Rain sensor menu
Time and date
Press GO
Press ‘GO’
Scroll UP/DOWN to set the
clock and the date and
press ‘GO’ for the next digit
00:00 dd/mm/yy
Next digit
10:37 23/04/07
Confirm
Press ‘GO’ to confirm
Time and date
Press GO
Time and date
Press GO
Press ‘GO’
Scroll UP/DOWN to set the
clock and the date and
press ‘GO’ for the next digit
00:00 dd/mm/yy
Next digit
00:00 dd/mm/yy
Next digit
10:37 23/04/07
Confirm
10:37 23/04/07
Confirm
Press ‘GO’ to confirm
Figure 2.7
Time and date
Set sensitivity
Press GO
Rain sensor
Press GO
Reading (29) 25
Confirm
Rain sensor on
Press GO
Rain sensor off
Confirm
Set sensitivity
Press GO
Rain sensor
Press GO
Rain sensor
Press GO
Reading (29) 25
Confirm
Reading (29) 25
Confirm
Reading (29) 25
Confirm
Rain sensor on
Press GO
Rain sensor on
Press GO
Rain sensor off
Confirm
Rain sensor off
Confirm
2.1.3 External Base
Allows the option to setup the Base Station outside the lawn; recommended
when you want to conceal the mower from people eyes while not mowing.
The default set by the producer is set to ‘off’; if you setup Robomow outside
the lawn it is required to change the setting of ‘External base’ to ‘on’.
The mower follows the wire for 5m (15ft) from the Base Station before it
enters to mow the inner area, thus it is recommended to set the Base Station
at maximum 3-4m (10-13ft) from the lawn; however if you want to set the
mower in a bigger distance from the lawn, you have to increase the ‘Distance’
setting (in the ‘External base’ menu) respectively.
To perform external setup of the Base Station refer to paragraph 1.3.2.
2.2 Settings
The ‘Settings’ menu allows the user to set the options that refer to the Robomow (figure 2.1).
2.2.1 Child Guard
Child guard is a feature that when activated will help deter use by young children and other
unauthorized people. It will prevent operation to those not familiar with the mower. The key
sequence to unlock the guard for operation is pressing the
‘UP’ arrow key and then the ‘STOP’
key to unlock the controls. Two minutes of inactivity will re-lock the keys.
It is strongly recommended to use the “Child Guard” menu option in order to prevent
operation by children or others who are not familiar with the safe operation of the
Robomow.
2.2.2 Anti-Theft
The anti-theft system provides the user a disabling function that will prevent anyone from using or
driving the Robomow unless they have the valid code to enter. You will be prompted to enter a
four-digit code of your choice to use as your personal security code. Use the scroll arrows in
order to change each digit position to a different number and then press
‘GO’ to move to the next
digit to select. You will find a place to record your personal security code in Chapter 8 of this
manual. Be sure to record your code for future reference.
2.2.3 Time And Date
Allows setting time and date (figure 2.7):
2.2.4 Rain Sensor
The Rain sensor feature enables the mower to detect rain and skip or stop the operation as it is
detected. There are two options under the
‘Rain sensor’ menu, as shown in Figure 2.8:
Set sensitivity – Enables to set the sensitivity of the rain sensor in which the mower will detect rain
below the threshold set. The default sensitivity set in the factory is 25, it means that in any reading
below 25 the mower will detect rain and will not operate. The number in the brackets shows the
actual reading of the rain sensor.
Rain sensor on/off - Allows turning the rain sensor feature off to enable operation in rain and wet
grass conditions.

Содержание

Похожие устройства

Скачать