![Makita hr4501c [4/12] Functional description](/img/pdf.png)
Makita hr4501c [4/12] Functional description
![Makita Перфоратор HR4501C +Отвертка аккумуляторная 6723DW [4/12] Functional description](/views2/1175213/page4/bg4.png)
4
8. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9. Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
only when hand-held.
12. Do not point the tool at any one in the area
when operating. The bit could fly out and
injure someone seriously.
13. Do not touch the bit or parts close to the bit
immediately after operation; they may be
extremely hot and could burn your skin.
14. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
1
006307
FOR MODEL HR4511C
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
FOR MODELS HR4510C/ HR4501C
Trigger switch
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
• This switch functions when setting the tool in
symbol and symbol modes.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Slide switch
CAUTION:
• Before plugging in the tool, always check to see
that the tool is switched off.
• This switch functions only when setting the tool in
symbol action mode.
When using the tool in the hammering mode for a long
time, the slide switch is available. To start the tool, push
the "I (ON)" side of the switch lever. To stop the tool,
push the "O (OFF)" side of the switch lever.
1
006308
Speed change
1
006334
The revolutions and blows per minute can be adjusted
just by turning the adjusting dial. The dial is marked 1
(lowest speed) to 5 (full speed).
Refer to the table below for the relationship between the
number settings on the adjusting dial and the
revolutions/blows per minute.
1. Adjusting dial
1. Switch lever
1. Switch trigger
Содержание
- Hr4501c hr4510c hr4511c 1
- Instruction manual 1
- Rotary hammer 1
- General safety rules 2
- Save these instructions 2
- Specifications 2
- Symbols 2
- Specific safety rules 3
- Functional description 4
- Save these instructions 4
- Speed change 4
- Switch action 4
- Warning 4
- Selecting the action mode 5
- Assembly 6
- Indicator lamp 6
- Side grip 6
- Side handle 6
- Torque limiter 6
- Bit angle when chipping scaling or demolishing 7
- Installing or removing the bit 7
- Blow out bulb optional accessory 8
- Chipping scaling demolition 8
- Depth gauge 8
- Hammer drilling operation 8
- Maintenance 8
- Operation 8
- Accessories 9
- Makita corporation 12
Похожие устройства
- Makita kp0800 Инструкция по эксплуатации
- Makita bo5030 Инструкция по эксплуатации
- Makita 6413 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-МИНИ-ФР-К Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Инструкция по эксплуатации
- Makita 5008mg Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Руководство налогового инспектора
- ШТРИХ–М ШТРИХ-ФР-К Руководство программиста
- Makita ga5021c Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Ремонтная документация
- ШТРИХ–М ШТРИХ-ФР-К OPOS Драйвер 1.7.10
- Makita ga4530 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Ремонтная документация
- Makita hr2600 Инструкция по эксплуатации
- Makita hr1830 Инструкция по эксплуатации
- Makita td0101 Инструкция по эксплуатации
- Makita hp1631 Инструкция по эксплуатации
- Makita uh4861 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-950К Инструкция по эксплуатации
Скачать
Случайные обсуждения