![Makita kp0800 [8/12] Connecting a vacuum cleaner](/img/pdf.png)
Makita kp0800 [8/12] Connecting a vacuum cleaner
![Makita kp0800 [8/12] Connecting a vacuum cleaner](/views2/1175214/page8/bg8.png)
8
dust bag of its contents, tapping it lightly so as to remove
particles adhering to the insides which might hamper
further collection.
NOTE:
• If you connect a Makita vacuum cleaner to this tool,
more efficient and cleaner operations can be
performed.
Connecting a vacuum cleaner
010176
For tool without nozzle
When you wish to perform clean planing operation,
connect a Makita vacuum cleaner to your tool. Then
connect a hose of the vacuum cleaner to the nozzle
(optional accessory) as shown in the figures.
For tool with nozzle
When you wish to perform clean planing operation,
connect a Makita vacuum cleaner to your tool. Then
connect a hose of the vacuum cleaner to the nozzle as
shown in the figures.
Elbow (optional accessory)
1
2
010177
Use of elbow allows change of chip discharge direction
to perform cleaner work.
For tool without nozzle
Remove the chip cover and install the nozzle (optional
accessory). Attach the elbow (optional accessory) on the
nozzle of the tool by just slipping on it. To remove it,
just pull it out.
For tool with nozzle
Attach the elbow (optional accessory) on the nozzle of
the tool by just slipping on it. To remove it, just pull it out.
OPERATION
Hold the tool firmly with one hand on the knob and the
other hand on the switch handle when performing the
tool.
Planing operation
1
2
010178
First, rest the tool front base flat upon the workpiece
surface without the blades making any contact. Switch
on and wait until the blades attain full speed. Then move
the tool gently forward. Apply pressure on the front of
tool at the start of planing, and at the back at the end of
planing. Planing will be easier if you incline the
workpiece in stationary fashion, so that you can plane
somewhat downhill.
The speed and depth of cut determine the kind of finish.
The power planer keeps cutting at a speed that will not
result in jamming by chips. For rough cutting, the depth
of cut can be increased, while for a good finish you
should reduce the depth of cut and advance the tool
more slowly.
Shiplapping (Rabbeting)
002580
To make a stepped cut as shown in the figure, use the
edge fence (guide rule) which is obtained as accessory.
1
2
010181
1. Blade edge
2. Cutting line
1. Start
2. End
1. Elbow
2. Nozzle
Содержание
- Instruction manual 1
- Kp0800 1
- Planer 1
- Ec declaration of conformity 2
- Specifications 2
- Symbols 2
- General power tool safety warnings 3
- Save all warnings and instructions for future reference 3
- Planer safety warnings 4
- Save these instructions 4
- Warning 4
- Adjusting depth of cut 5
- Assembly 5
- Functional description 5
- Removing or installing planer blades 5
- Switch action 5
- A front base movable shoe b rear base stationary shoe 7
- Although this side view cannot show it the edges of the blades run perfectly parallel to the rear base surface 7
- Correct setting 7
- Dust bag accessory 7
- For the correct planer blade setting 7
- Gouging at end 7
- Gouging at start 7
- Nicks in surface 7
- Connecting a vacuum cleaner 8
- Elbow optional accessory 8
- Operation 8
- Planing operation 8
- Shiplapping rabbeting 8
- Chamfering 9
- Maintenance 9
- Sharpening the planer blades 9
- Accessories 10
- Replacing carbon brushes 10
- Makita corporation anjo aichi japan 12
Похожие устройства
- Makita bo5030 Инструкция по эксплуатации
- Makita 6413 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-МИНИ-ФР-К Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Инструкция по эксплуатации
- Makita 5008mg Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Руководство налогового инспектора
- ШТРИХ–М ШТРИХ-ФР-К Руководство программиста
- Makita ga5021c Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ФР-К Ремонтная документация
- ШТРИХ–М ШТРИХ-ФР-К OPOS Драйвер 1.7.10
- Makita ga4530 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Ремонтная документация
- Makita hr2600 Инструкция по эксплуатации
- Makita hr1830 Инструкция по эксплуатации
- Makita td0101 Инструкция по эксплуатации
- Makita hp1631 Инструкция по эксплуатации
- Makita uh4861 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-950К Инструкция по эксплуатации
- ШТРИХ–М Retail-01K Инструкция по эксплуатации
Скачать
Случайные обсуждения