![Makita ga5021c [11/16] Mm 4 1 2 125 mm 5 150 mm 6](/img/pdf.png)
Makita ga5021c [11/16] Mm 4 1 2 125 mm 5 150 mm 6
![Makita ga5021c [11/16] Mm 4 1 2 125 mm 5 150 mm 6](/views2/1175225/page11/bgb.png)
11
leading to personal injury.
CAUTION:
• After operation, always switch off the tool and wait
until the wheel has come to a complete stop
before putting the tool down.
Grinding and sanding operation
A
B
15
007998
ALWAYS hold the tool firmly with one hand on rear
handle and the other on the side handle. Turn the tool
on and then apply the wheel or disc to the workpiece.
In general, keep the edge of the wheel or disc at an
angle of about 15 degrees to the workpiece surface.
During the break-in period with a new wheel, do not
work the grinder in the B direction or it will cut into the
workpiece. Once the edge of the wheel has been
rounded off by use, the wheel may be worked in both A
and B direction.
Operation with abrasive cut-off / diamond
wheel (optional accessory)
1
2
3
4
010855
The direction for mounting the lock nut and the inner
flange varies by wheel thickness. Refer to the table
below.
22.23 mm (7/8")
Abrasive cut-off wheel
Diamond wheel
Thickness: Less than
4 mm (5/32")
Thickness: 4 mm (5/32")
or more
Thickness: Less than
4 mm (5/32")
Thickness: 4 mm (5/32")
or more
22.23 mm (7/8")
22.23 mm (7/8") 22.23 mm (7/8")
115 mm (4-1/2") / 125 mm (5") / 150 mm (6")
1
2
3
1
4
3
3.2. Inner flange1. Abrasive cut-off wheel Diamond wheelLock nut 4.
01118 4
WARNING:
• When using an abrasive cut-off / diamond wheel,
be sure to use only the special wheel guard
designed for use with cut-off wheels.
• NEVER use cut-off wheel for side grinding.
• Do not "jam" the wheel or apply excessive
pressure. Do not attempt to make an excessive
depth of cut. Overstressing the wheel increases
the loading and susceptibility to twisting or binding
of the wheel in the cut and the possibility of
kickback, wheel breakage and overheating of the
motor may occur.
•
Do not start the cutting operation in the workpiece.
Let the wheel reach full speed and carefully enter
into the cut moving the tool forward over the
workpiece surface. The wheel may bind, walk up or
kickback if the power tool is started in the workpiece.
• During cutting operations, never change the angle
of the wheel. Placing side pressure on the cut-off
wheel (as in grinding) will cause the wheel to crack
and break, causing serious personal injury.
• A diamond wheel shall be operated perpendicular
to the material being cut.
1. Lock nut
2. Abrasive cut-off
wheel/diamond
wheel
3. Inner flange
4. Wheel guard for
abrasive cut-off
wheel/diamond
wheel
Содержание
- Angle grinder 1
- Specifications 2
- Symbols 2
- Ec declaration of conformity 3
- General power tool safety warnings 3
- Save all warnings and instructions for future reference 3
- Grinder safety warnings 5
- Save these instructions 7
- Warning 7
- Constant speed control for models ga5020c ga5021c ga6020c ga6021c 8
- Electronic function 8
- Functional description 8
- Shaft lock 8
- Soft start feature 8
- Switch action 8
- Assembly 9
- Installing loop handle optional accessory 9
- Installing or removing wheel guard for depressed center wheel multi disc abrasive cut off wheel diamond wheel 9
- Installing side grip handle 9
- Installing or removing depressed center grinding wheel multi disc optional accessory 10
- Operation 10
- Grinding and sanding operation 11
- Mm 4 1 2 125 mm 5 150 mm 6 11
- Operation with abrasive cut off diamond wheel optional accessory 11
- Maintenance 12
- Optional accessories 12
- Replacing carbon brushes 12
- Anjo aichi japan 16
- Makita corporation 16
- Www makita com 16
Похожие устройства
- ШТРИХ–М ШТРИХ-ФР-К Ремонтная документация
- ШТРИХ–М ШТРИХ-ФР-К OPOS Драйвер 1.7.10
- Makita ga4530 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Инструкция по эксплуатации
- ШТРИХ–М Retail-01 Ремонтная документация
- Makita hr2600 Инструкция по эксплуатации
- Makita hr1830 Инструкция по эксплуатации
- Makita td0101 Инструкция по эксплуатации
- Makita hp1631 Инструкция по эксплуатации
- Makita uh4861 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-950К Инструкция по эксплуатации
- ШТРИХ–М Retail-01K Инструкция по эксплуатации
- Makita uh4261 Инструкция по эксплуатации
- ШТРИХ–М Retail-01K Ремонтная документация
- Makita elm3711 Инструкция по эксплуатации
- Makita elm3311 Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ПРИНТ ФI Инструкция по эксплуатации
- ШТРИХ–М ШТРИХ-ПРИНТ ФI Ремонтная документация
- ШТРИХ–М ШТРИХ-ПРИНТ ФI Руководство администратора
- ШТРИХ–М ШТРИХ-ПРИНТ М Инструкция по эксплуатации