![Netgear wnr614-100ins [12/78] Connect to the network](/img/pdf.png)
Netgear wnr614-100ins [12/78] Connect to the network
![Netgear wnr614-100ins [12/78] Connect to the network](/views2/1175983/page12/bgc.png)
Connect to the Network and Access the Router
12
N150 and N300 Wireless Routers
Connect to the Network
You can connect to the router’s network through a wired or WiFi connection. If you set up
your computer to use a static IP address, change the settings so that it uses Dynamic Host
Configuration Protocol (DHCP).
Wired Connection
You can connect your computer to the router using an Ethernet cable and join the router’s
local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router has power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports.
Your computer connects to the local area network (LAN). A message might display on
your computer screen to notify you that an Ethernet cable is connected.
WiFi Connection
You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you can
find and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router has power (its Power LED is lit).
2. Check the WPS instructions for your computer or wireless device.
3. Press the WPS/Reset button on the rear panel of the router.
4. Within two minutes, on your computer or WiFi device, press its WPS button or follow its
instructions for WPS connections.
Your computer or wireless device connects to the WiFi network.
To find and select the WiFi network:
1. Make sure that the router has power (its Power LED is lit).
2. On your computer or wireless device, find and select the WiFi network.
The WiFi network name is on the product label.
3. Join the WiFi network and enter the WiFi password.
The password is on the product label.
Your wireless device connects to the WiFi network.
Содержание
- Models 1
- N150 and n300 wireless routers 1
- User manual 1
- Compliance 2
- N150 and n300 wireless routers 2
- Support 2
- Trademarks 2
- Chapter 1 hardware setup 3
- Chapter 2 connect to the network and access the router 3
- Chapter 3 specify your internet settings 3
- Chapter 4 networking 3
- Contents 3
- Chapter 5 manage your network 4
- Chapter 6 troubleshooting 4
- Appendix a supplemental information 5
- Factory settings 76 technical specifications 77 5
- Troubleshoot ip addresses 74 5
- Hardware setup 6
- Back panel 7
- Before you cable your router take a moment to become familiar with the product label and the front and back panels pay particular attention to the leds on the front panel 7
- Front panel leds 7
- Hardware features 7
- Table 1 front panel led descriptions 7
- Table 2 back panel port button and connector descriptions 7
- The back panel has the following ports button and connector 7
- The router front panel has the following status leds 7
- Position your router 8
- Cable your router 9
- Verify the cabling 10
- Access the router 11
- Connect to the network and 11
- Connect to the network and access the router 11
- Connect to the network 12
- Wifi connection 12
- Wired connection 12
- Netgear genie automatic internet setup 13
- Types of logins 13
- Use a web browser to access the router 13
- Log in to the router 14
- Specify your internet settings 16
- Use the internet setup wizard 17
- Manually set up the internet connection 18
- Specify an internet connection without a login 18
- Specify an internet connection that uses a login 19
- Change the mtu size 21
- N150 and n300 wireless routers 23
- Specify your internet settings 23
- Table 3 common mtu sizes 23
- Until the problem goes away the following table describes common mtu sizes and applications 23
- Networking 24
- View or change wan settings 25
- Set up a default dmz server 26
- Change the router s device name 27
- Change the lan tcp ip settings 28
- Specify the ip addresses that the router assigns 29
- Disable the dhcp server feature in the router 30
- Reserve lan ip addresses 31
- Specify basic wifi settings 33
- Use the wps wizard for wifi connections 33
- Change the wifi security option 35
- Set up a guest network 36
- Control the wireless radio 38
- Enable or disable the wireless radio 38
- Set up a wireless schedule 39
- Set up a wireless access list 40
- Specify wps settings 42
- Wireless distribution system 42
- Set up the base station 43
- Set up a repeater 44
- Static routes 46
- View devices currently on the network 48
- Improve network connections with universal plug and play 49
- Manage your network 51
- Update the router firmware 52
- Change the admin password 53
- Recover the admin password 53
- View router status 55
- Display internet port statistics 56
- View the internet connection settings 56
- View the internet connection status 57
- Dhcp connection 58
- Pppoe connection 59
- Pptp connection 59
- View wireless settings 59
- View guest network settings 60
- Manage the configuration file 61
- Reboot the router 61
- Back up settings 62
- Restore configuration settings 62
- Erase configuration settings 63
- Troubleshooting 64
- Admin password 65
- Forgotten passwords 65
- Wifi passwords 65
- Wifi connections 66
- Apply power to the router and check the leds 67
- Changes not saved 67
- Troubleshoot with the leds 67
- All leds remain lit 68
- Internet leds is off 68
- Power led is off or blinking 68
- Power led stays amber 68
- Cannot log in to the router 69
- Wifi led is off 69
- The router cannot access the internet 70
- Troubleshoot a pppoe internet connection 71
- Troubleshoot internet browsing 71
- Test the lan path to your router 72
- Troubleshoot your network using the ping utility 72
- Test the path from your computer to a remote device 73
- Troubleshoot ip addresses 74
- A supplemental information 75
- Supplemental information 75
- Factory settings 76
- N150 and n300 wireless routers 76
- Supplemental information 76
- Table 4 router factory default settings 76
- You can return the router to its factory settings use the end of a paper clip or some other similar object to press and hold the wps reset button on the back panel of the router for at least four seconds the router resets and returns to the factory settings that are shown in the following table 76
- N150 and n300 wireless routers 77
- Supplemental information 77
- Table 4 router factory default settings continued 77
- Table 5 router specifications 77
- Technical specifications 77
- N150 and n300 wireless routers 78
- Supplemental information 78
- Table 5 router specifications continued 78
Похожие устройства
- Nobo nte4s 05 Инструкция по эксплуатации
- Nobo nte4s 07 Инструкция по эксплуатации
- Nobo nte4s 12 Инструкция по эксплуатации
- Nobo nte4s 15 Инструкция по эксплуатации
- Nord дх-239-012 a+ Инструкция по эксплуатации
- Nord дх-220-312 a+ Инструкция по эксплуатации
- Nord nrt 274 032 (a+) Инструкция по эксплуатации
- Nord drf 119 nf wsp (a+) Инструкция по эксплуатации
- Nord drf 119 wsp (a+) Инструкция по эксплуатации
- Nord nrb 239 332 (a+) Инструкция по эксплуатации
- Nord df 168 isp (a+) Инструкция по эксплуатации
- Nord df 165 wsp (a+) Инструкция по эксплуатации
- Nord drf 110 nf wsp (a+) Инструкция по эксплуатации
- Nord дм-158-010 (a+) Инструкция по эксплуатации
- Nord дм-155 010 (a+) Инструкция по эксплуатации
- Nord df 159 wsp (a+) Инструкция по эксплуатации
- Nord дх-271 010 a+ Инструкция по эксплуатации
- Nord дх 431 010 (а+) Инструкция по эксплуатации
- Nord дх 416 010 (а+) Инструкция по эксплуатации
- Nord дх 239 312 (а+) Инструкция по эксплуатации