Oregon Scientific rar213hg [5/13] Remote sensor

LOCATION MEANING

Clock area Main unit batteries low

Outdoor temperature area Sensor batteries low

REMOTE SENSOR

The main unit can collect data from up to 5 sensors.

To set up the sensor:

1. Open the battery compartment.

2. Select a channel then press

RESET.

3. Close the battery door.

4. Place the sensor within 98 ft (30 m) of the main

unit using the table stand or wall mount.

TIP

Ideal placements for the sensor would be in any

location on the exterior of the home at a height of not

more than 5 ft (1.5 m) and which can shield it from direct

sunlight or wet conditions for an accurate reading.

1.5 m (5 ft)

NOTE

Use alkaline batteries for longer usage and

consumer grade lithium batteries in temperatures

below freezing.

SENSOR DATA TRANSMISSION

To search for a sensor:

• Press and hold

and MODE at the same time for

2 seconds.

To auto-scan among sensors:

The main unit can search for the sensor(s)

automatically. The temperatures will be displayed

automatically in sequential order.

The sensor reception icon in the remote sensor

area shows the status:

ICON DESCRIPTION

Main unit is searching for sensor(s).

A channel has been found.

The sensor cannot be found.

TIP

The transmission range may vary depending on

many factors. You may need to place the sensor(s) in

different locations to get the best result(s).