Qnap ts-431 Инструкция по эксплуатации онлайн [83/344] 162186

Creating iSCSI targets

Follow the steps below to create an iSCSI target:

1. Click "Create".

2. Select "iSCSI Target only" and click "Next".

3. Enter the target name and alias and choose to select "Data Digest" and/or "Header

Digest". Click "Next".

4. Enter the username and password for "Use CHAP authentication" and/or "Mutual

CHAP" and click "Next". Check "Use CHAP authentication" and only the initiator is

authenticated by the iSCSI target, and users of the initiators are required to enter

the username and password specified here to access the target. Check "Mutual

CHAP" for two-way authentication between the iSCSI target and the initiator. The

target authenticates the initiator using the first set of username and password. The

initiator authenticates the target using the "Mutual CHAP" settings.

5. Click "Next".

6. Click "Finish".

7. A new target is created.

Creating iSCSI LUNs

Follow the steps below to create a LUN for an iSCSI target:

1. Click "Create".

2. Select "iSCSI LUN only" and click "Next".

3. Choose the LUN type and LUN allocation method, enter the name of the LUN and

specify the LUN location (disk volume on the NAS), the capacity and alert threshold

for the LUN. Click "Next".

4. Select a target to map and click "Next".

5. Confirm the settings and click "Next".

6. Click "Finish".

7. A LUN is created and mapped to a target as specified in Step 4.

To create an un-mapped iSCSI LUN, select "Do not map it to a target for now" in Step

The un-mapped LUN is created and listed under the un-mapped iSCSI LUN list.

The description of each iSCSI target and LUN status is explained in the table below:

Item

Status

Description

iSCSI target

Ready

The iSCSI target is ready but no