Qnap ts-431 Инструкция по эксплуатации онлайн [85/344] 162186

the un-mapped iSCSI LUN list.

View

Connections

View the connection status of an iSCSI target.

Switching iSCSI LUNs between targets

Follow the steps below to switch an iSCSI LUN between targets:

1. Select an iSCSI LUN to un-map from its iSCSI target.

2. Click "Action" > "Disable".

3. Click "OK".

4. Click "Action" > "Un-map" to un-map the LUN. The LUN will appear on the un-

mapped iSCSI LUN list.

5. Select the un-mapped iSCSI LUN.

6. Click "Action" > "Map" to map the LUN to another target.

7. Select the target to map the LUN and click "Apply".

8. The LUN will be mapped to the target.

After creating the iSCSI targets and LUN on the NAS, the iSCSI initiator installed on the

computer (Windows PC, Mac, or Linux) can be used to connect to the iSCSI target and

LUN and the disk volumes can be used as the virtual drives on the computer.

Expanding iSCSI LUN capacity

The NAS supports capacity expansion for iSCSI LUNs. To do so, follow the steps below:

1. Locate an iSCSI LUN on the iSCSI target list.

2. Click "Action" > "Modify".

3. Specify the capacity of the LUN. Note that the LUN capacity can be increased

several times up to the maximum limit but cannot be decreased.

4. Click "Apply" to save the settings.

Note:

An iSCSI LUN must be mapped to an iSCSI target before the capacity can be

increased.

For the type of LUN allocation, the maximum LUN capacity for both thin

provisioning and instant allocation is 144TB.

Optim izing iSCSI Perform ance