Tp-Link TD-W8151N Инструкция по эксплуатации онлайн [47/102] 16754

Tp-Link TD-W8151N Инструкция по эксплуатации онлайн [47/102] 16754
TD-W8151N
150Mbps Wireless N ADSL2+ Modem Router User Guide
Access Point: Select Activated to allow wireless station to associate with the access
point.
Channel: Select the country and channel you want to use from the drop-down List of
Channel. This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval
value indicates the frequency interval of the beacon. A beacon is a packet broadcast by
the Router to synchronize the wireless network. The default value is 100.
RTS/CTS Threshold: Should you encounter inconsistent data flow, only minor reduction
of the default value 2347 is recommended. If a network packet is smaller than the preset
RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends
Request to Send (RTS) frames to a particular receiving station and negotiates the
sending of a data frame. After receiving an RTS, the wireless station responds with a
Clear to Send (CTS) frame to acknowledge the right to begin transmission. In most
cases, keep its default value of 2347.
Fragmentation Threshold: This value specifies the maximum size for a packet before
data is fragmented into multiple packets. If you experience a high packet error rate, you
may slightly increase the Fragmentation Threshold. Setting the Fragmentation
Threshold too low may result in poor network performance. Only minor reduction of the
default value is recommended. In most cases, it should remain at its default value of
2346.
DTIM: This value, between 1 and 255, indicates the interval of the Delivery Traffic
Indication Message (DTIM). A DTIM field is a countdown field informing clients of the
next window for listening to broadcast and multicast messages. When the Router has
buffered broadcast or multicast messages for associated clients, it sends the next DTIM
with a DTIM Interval value. Its clients hear the beacons and awaken to receive the
broadcast and multicast messages. The default value is 1.
Wireless Mode: In the drop-down list you can select “802.11n”, “802.11g”, “802.11b” or
"802.11 b+g ","802.11 g+n ", "802.11 b+g+n " allows both 802.11g, 802.11b and
802.11n wireless stations to connect to the Router.
Access point Settings: Настройки точки доступа. Здесь можно задать правила
коммуникации между компьютерами с возможностью беспроводной передачи данных и
прочими устройствами и беспроводной сетью.
Access point: Выберите значение Activated, чтобы разрешить станции с
беспроводной передачей данных взаимодействовать с точкой доступа.
Channel: Укажите свой регион и из выпадающего списка выберите канал, который
вы хотите использовать. В данном поле выбирается рабочая частота. Нет никакой
необходимости изменять канал по умолчанию, если только нет проблемы с
помехами, вызванными находящейся поблизости другой точкой доступа.
Beacon Interval: Указывается частота отправки пакетов Beacon, значение лежит в
пределах 20-1000 миллисекунд. Пакет Beacon это пакет, рассылаемый
маршрутизатором для синхронизации работы беспроводной сети. Значение по
умолчанию 100.
RTS/CTS Threshold: В случае нарушения стабильности потока данных
рекомендуется лишь незначительная корректировка значения по умолчания (2347)
в сторону понижения. Если размер сетевого пакета ниже, чем пороговое значение
RTS, механизм RTS/CTS не включается. Маршрутизатор производит отправку
36

Содержание