Rommelsbacher do 60 [10/12] Attaching and detaching the front lever

Fixing the tin

Connect the appliance to the mains. Cord not in use can be stored in

the cable storage on the rear side of the appliance.

• Clean the tin’s upper side.

• Fold the front lever up and hold it.

• Place the tin’s outer edge slightly aslant on the driving wheel.

• Now, press the tin with light pressure against the guiding spike

and the driving wheel.

• Then slowly fold the front lever down. Make sure that the blade is

on the inside of the tin’s edge. The magnetic lid holder snaps the

lid.

Switching the appliance on and off

• For starting the appliance, push the front lever ﬁ rmly down. If the tin is correctly ﬁ xed, the

appliance will start automatically.

• After ﬁ nishing the opening process, the appliance stops automatically.

Taking the tin out

• Before folding the front lever up, make sure you hold the tin.

• By folding the front lever up, the tin is released and can be taken out cautiously.

• The lid is held by the magnetic holder and can also be taken away cautiously.

• Always pull the mains plug when the opening process is ﬁ nished.

NOTE: If the opening of a tin is successful, depends heavily on the tin’s quality. For opening,

a tin with a suﬃ cient rim on the upper side is necessary. Furthermore, the tin should not be

damaged or dented. The tin must not have a pull tab lid. Several attempts might be necessary

for opening the tin.

NOTE: During this process you can release tin and front lever. However, we recommend leaving

one hand near the tin in order to catch a tin which loosens.

ATTENTION: The tin’s lid and rim can be sharp-edged. In order to avoid injuries, handle the

opened tin with care!

Attaching and detaching the front lever

• Make sure that the appliance has been unplugged.

• For detaching the front lever fold it up as far as it will go and pull it

forwards out of the mounting.

• For attaching the front lever place its two pins opposite the reces-

ses of the lever support and push the front lever to the back as far

as it will go.