Home
Главная
SOLER&PALAU
silent-200 crz
Инструкция по эксплуатации Страница: 11

SOLER&PALAU silent-200 crz — high-Quality Silent Axial Extractor Fans for Efficient Ventilation [11/80]

ENGLISH

SILENTAxial Extractor Fans

Installation

IMPORTANT

Electrical connection

The SILENT extractor fan ranges are

manufactured to the high standards of

production and quality as laid down by the

international Quality Standard ISO 9001. All

components have been checked and every

one of the final products will have been

individually tested at the end of the

manufacturing process.

- This appliance is not intended for use by

young children or infirm persons unless they

have been adequately supervised by a

responsible person to ensure that they can

use the appliance safely

- Young children should be supervised to

ensure that they do not play with the

appliance.

On reciept of the product we recommend that

you to check the following :

1- That it is the correctsize.

2- That it is the correct model.

3- That the details on the rating label are

those you require: voltage, frequency...

The installation must be carried out in

accordance with the electrical standards in

force in your country.

:Beforeinstallingandwiringtheunit,

ensurethatthemainsupplyisdisconnected.

Precautions must be taken to avoid the back-

flow of gases into the room from the open flue

of gas or other fuel-burning appliances.

Fig. 1 / 1b:

1 : Protection grille

2 : Connection terminals

3 : Outlet with backdraught shutter

4 : Cable entry

5 :Adjustment dial (SILENT-100 CHZ VISUAL

- fig.1b)

The SILENT is suitable for wall or ceiling

mounting and can either discharge directly to

the outside or via an individual ducting

system (see Fig. 2).

The unit can be mounted on the wall or ceiling

using the 4 wall plugs and the screws

provided.

Make a hole in the wall or ceiling of diameter:

-SILENT-100: 105 mm

- SILENT-200: 125 mm

- SILENT-300: 160 mm

If the unit is to be installed with individual

ducting, use a standard duct of diameter:

- SILENT-100: 100 mm

- SILENT-200: 125 mm

- SILENT-300: 150 or 160 mm

Ensure that there are no obstructions to the

airflow and that the impeller turns freely.

Fix the extractor to the wall in such a way that it

is not distorted in order to avoid noise

generation or problems with the rotation of the

impeller. Make sure that the backdraught

shutter opens freely and has not being

damaged in transit. Introduce the mains cable

throughthecableentry(4)andfixittothe wall.

Connect the electrical wiring as set out below

and then mount the protection grille (1).

The SILENT is an extractor designed for a

single phase supply, with voltage and

frequency as indicated on the rating plate of

the unit. The units are manufactured with

double electrical insulation

(Class II) and therefore they do not need an

earth connection.

The electrical installation must include a

double pole switch with a contact clearance of

at least 3 mm.

The electrical cable must enter the SILENT

through the cable entry (4).

Once the cable has been introduced proceed

using the electrical wiring diagram applicable

to the selected model.

For these models use the following diagrams:

Fig.3: Switching the extractor through the

light switch.

Fig.4: To switch the fan through an

independent switch.

This model is provided with an adjustable

over-run timer. The timer allows the fan to

continue to operate for the selected period

after the switch has been turned off (fig.6).

Model provided with a 4 positions adjustable

electronic timer:Fig.5 shows how to connect

SILENT CZ

SILENT CRZ

Содержание

Похожие устройства

ENGLISH SILENTAxial Extractor Fans The SILENT extractor fan ranges are manufactured to the high standards of production and quality as laid down by the international Quality Standard ISO 9001 All components have been checked and every one of the inal products will have been individually tested at the end of the m anufacturing process This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely Young children should be supervised to ensure that they do not play with the appliance On reciept of the product we recommend that you to check the following 1 Tha t it is the correct size 2 Tha t it is the correct m odel 3 That the details on the rating label are those you require voltage frequency The installation must be carried out in accordance with the electrical standards in force in your country Installation IMPORTANT Before installing and wiring theunit ensure thatthe main supply isdisconnected Precautions must be taken to avoid the backflow ofgases into the room from the open flue of gas or other fuel burning appliances Fig 1 1b 1 Protection grille 2 Connection terminals 3 Outlet with ba ckdraug ht shutter 4 Cable entry 5 Adjustm entdial SILENT 100 CHZ VISUAL fig 1b The SILENT is suitable for wall or ceiling mounting and can either discharge directly to the outside or via an individual ducting system see Fig 2 The unit can be mounted on the wall or ceiling using the 4 wall plugs and the screws provided Make a hole in the wall or ceiling of diam eter SILENT 100 105 mm SILENT 200 125 mm SILENT 300 160 mm If the unit is to be installed with individual ducting use a standard duct of diam eter SI LENT 100 100 mm SILENT 200 125 mm SILENT 300 150 or 160 mm Ensure that there are no obstructions to the airlow and that the impeller turns freely Fix the extractor to the wall in such a way that it is not distorted in order to avoid noise generation or problems with the rotation of the impeller Make sure that the backdraught shutter opens freely and has not being damaged in transit Introduce the mains cable through the cableentry 4 andfixittothewall Connect the electrical wiring as set out below and then mount the protection grille 1 Electrical connection The SILENT is an extractor designed for a single phase supply with voltage and frequency as indicated on the rating plate of the unit The units are manufactured with double electrical insulation Class II and therefore they do not need an earth connection The electrical installation must include a doublepoleswitch with a con tact clearance of atleast3mm The electrical cable must enter the SILENT through the cable entry 4 Once the cable has been introduced proceed using the electrical wiring diagram applicable to the selected model SILENT CZ For these models use the following diagrams Fig 3 Switching the extractor through the lightswitch Fig 4 To switch the fan through an indepen dent switch SILENT CRZ This model is provided with an adjustable over run timer The timer allows the fan to continue to operate for the selected period after the switch has been turned off fig 6 Model provided with a 4 positions adjustable electronic timer Fig 5 shows how to connect

Discover our range of silent axial extractor fans designed for optimal performance and safety. Ideal for various installations, ensuring effective ventilation in any space.