Sandisk extreme pro, sdssdxps-240g-g25 Инструкция по эксплуатации онлайн

SanDisk

Solid State Drive

Quick-Start Installation Guide

Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!

This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer

HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD

using cloning software.

Replacing your HDD with a solid state drive consists of three easy steps:

1. Connect your SanDisk SSD to your computer

2. Clone the data from your existing HDD to your new SanDisk SSD

3. Uninstall your HDD and replace it with your new SanDisk SSD

 • Obtaindatacloningsoftware.

There are many options available for purchase, but in this guide we will use data cloning software

provided by Apricorn® to walk you through the data cloning process.

 • Conrmyouhavetherequiredhardware*foryourinstallationscenario:

1. SATA data cable

(required for desktops computers only)

2. USB-to-SATA data cable

3. 3.5-inch mounting adapter and screws

(required for desktop computers only)

4. Phillips screwdriver

*EachoftheabovehardwarecomponentsaresoldseparatelyorcanbefoundintheSanDiskSSDConversionKit.Seewww.sandisk.com/go-SSD

BEFOREYOUSTART

This guide applies to most solid state drives;

check the instructions included with your SSD

for more details.

NOTE: