Sandisk extreme pro, sdssdxps-240g-g25 [5/7] Notebook computer ssd installation

We’realmostdone!Inthisnalstep,youwillswapyourcurrentHDDwithyournewSanDiskSSD.

Before you begin, be sure to shut your computer down and disconnect the power cable.

Removethebatteryifit’sanotebookcomputer.

This process will dier depending on whether you are installing your new SanDisk SSD in a desktop or

notebookcomputer.We’llcovertheseintwoseparatesections.Ifyou’reinstallingyourSSDinadesktop

computer,pleaseskiptothe“DesktopComputerSSDInstallation”sectionbelow.

Replacing your HDD

STEP3

Notebook Computer SSD Installation

1. Makesureyourcomputerispoweredo,thepowercableisdisconnectedandthebatteryisremoved.

Youmaywanttokeepyouroldharddiskdriveasabackupdrive.

NOTE:

2. Openyournotebookcomputer’sdrive

 bay(refertoyourcomputer’smanualfor

instructions).

3. Remove any brackets or adapters attached

to the current HDD and install them on your

new SanDisk SSD in the same way as they

were on your current HDD. (Note: This step

may not apply to every install, not all

notebook hard disk drives have additional

brackets or adapters.)

4. Align the connector pins on your SanDisk

SSD with the pins on the SATA connector in

the drive bay and carefully place the SSD

into the drive bay. (Note: Be sure to ﬁrmly

connect the SSD connector pins with the pins

on the SATA connector in your notebook

drive bay.)

5. Replacethenotebookcomputer’sdrivebay.

6. Replace your battery and power cable, then power on your notebook computer.

Whenyourcomputerbootsforthersttime,youmayseeascreenindicatingthattheupgradeprocess

is complete.

…And that’s it! Enjoy the speed of your new SanDisk SSD!