Timberk tec.pf10 le 1500 in [5/24] Complete set

www.timberk.com • electric convector heater

Wall mounting of the convector (Fig.3,4,5) dimensions are

given in mm.

1. Convector - 1pcs.

2. Castors - 2 pcs.

3. Remote control - 1pcs.

4. Manual instruction - 1pcs.

5. Warranty card - 1pcs.

6. Packing - 1pcs.

7. Installation kit - 1pcs.

NOTE:

To improve products quality, design and technical

characteristics of the convector, as well as its scope

of delivery may be altered by the manufacturer

without prior notification.

6. INSTALLATION

5. COMPLETE SET

1. Open the factory package and carefully remove the unit out of it.

2. Remove seals out of foamed plastic on sides of the unit and take it out

of polyethylene.

3. In accordance with Fig. 2, 3 and table 2, determine the place of

convector’s installation observing minimum distances from objects and

minimum distance from the floor.

4. Mark the height, at which the convector is to be mounted, then attach

bracket to the wall.

5. Put visible marks in mounting holes.

6. Drill holes of the required diameter on the mounting holes, insert dowels,

attach the mounting bracket and fasten adjusting screws, thereby

securing bracket on the wall (Fig. 5).

Fig. 2

Fig. 3

IMPORTANT!

DO NOT COVER THE UNIT. Do not dry clothes and any

other fabrics and materials on the unit. It may cause its

overheating, failure or inflict significant damage to you

and/or your property.

Leg mounting of the convector (Fig. 4)

1. Take 2 legs out of a package box.

2. Turn over the unit so that its lower part was at the top.