Yealink W52P Инструкция по эксплуатации онлайн [31/98] 166931

Basic Operations

To select the base station via the handset:

1. Press to enter the main menu.

2. Select ->Registration->Select Base.

The LCD screen displays all base stations the handset registered to and the

Bestbase option. The radio box of the currently used base station is marked.

3. Press or to highlight the desired base station or the Bestbase option, and

then press the Select soft key.

The handset begins to search for base station. After successful connection, the

handset plays a warning tone and prompts “Base selected successfully!”.

You can highlight the base station the handset registered to, and then press the

Rename soft key to rename the base station name.

The base station attempts to contact a DHCP server in your network to obtain valid

network settings (e.g., IP address, subnet mask, gateway address and DNS address) by

default.

If the base station cannot contact a DHCP server for any reason, you need to configure

basic network settings manually.

To configure basic network settings manually via the handset:

1. Press to enter the main menu.

2. Select ->System Settings->Network.

3. Enter the system PIN (default: 0000).

4. Press the Done soft key.

5. Press or to select Static from the IP Address Type field.

6. Enter the valid values in the IP Address, Subnet Mask, Default Gateway, Primary

DNS and Secondary DNS fields respectively.

7. Press the Save soft key to accept the change.

Static DNS is not normally required when DHCP is enabled on your phone. In some

cases, static DNS may be needed in your environment. Then you can manually

configure static DNS on the handset to ignore DNS obtained by DHCP.

To configure static DNS via the handset:

1. Press to enter the main menu.

2. Select ->System Settings->Network.

3. Enter the system PIN (default: 0000).

4. Press the Done soft key.

5. Press or to select Manual from the DNS Type field when DHCP is selected from

the IP Address Type field.