Yealink W52P Инструкция по эксплуатации онлайн [32/98] 166931

User Guide for the W52P IP DECT Phone

6. Enter the valid values in the Primary DNS and Secondary DNS fields respectively.

7. Press the Save soft key to accept the change.

If you are using an xDSL modem, you can connect your base station to the Internet via

PPPoE mode. Set the Internet port as a PPPoE port. The PPPoE port will perform a PPP

negotiation to obtain the IP address. Contact your system administrator for the PPPoE

user name and password.

To configure PPPoE via the handset:

1. Press to enter the main menu.

2. Select ->System Settings->Network.

3. Enter the system PIN (default: 0000).

4. Press the Done soft key.

5. Press or to select PPPoE from the IP Address Type field.

6. Enter the valid values in the PPPoE User and PPPoE Password fields.

You can press to enter special characters and press to switch the input

method.

7. Press the Save soft key to accept the change.

Note

You can view the system status on your handset. Available information of the system

status includes:

 Base station status (e.g., IP address, firmware version, MAC address and device

certificate status of the base station)

 Handset status (e.g., hardware version, model, IPUI code and firmware version of

the handset)

 Line status

To check the base station status via the handset:

1. Press to enter the main menu.

2. Select ->Base.

The LCD screen displays status information of the base station and the Network

option.

3. Press or to scroll through and view the status information.

4. Select Network.

Wrong network settings may result in inaccessibility of your phone and may also have an

impact on your network performance. For more information on these parameters,

contact your system administrator.