Yealink SIP-T19 E2 — настройка интеркома и тайм-аута для IP-телефонов [396/841]

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones

380

Parameters

Permitted Values

Default

hold.

Note: It works only if the value of the parameter “features.intercom.allow” is set to 1

(Enabled) and "call_waiting.enable" are set to 1 (Enabled).

Web User Interface:

Features->Intercom->Intercom Barge

Phone User Interface:

Menu->Features->Intercom->Intercom Barge

To configure intercom via web user interface:

1. Click on Features->Intercom.

2. Select the desired values from the pull-down lists of Accept Intercom, Intercom

Mute, Intercom Tone and Intercom Barge.

3. Click Confirm to accept the change.

To configure intercom via phone user interface:

1. Press Menu->Features->Intercom.

2. Press or , or the Switch soft key to select the desired values from the

Accept Intercom, Intercom Mute, Intercom Tone and Intercom Barge fields.

3. Press the Save soft key to accept the change.

Call timeout defines a specific period of time within which the IP phone will cancel the

dialing if the call is not answered.

Procedure

Call timeout can only be configured using the configuration files.

Configuration File

<y0000000000xx>.cfg

Configure the duration time (in

seconds) in the ringback state.