Yealink SIP-T19 E2 — настройка PPPoE подключения для IP-телефонов [91/841]

Getting Started

Parameters

Permitted Values

Default

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN

Port->IPv4->PPPoE IPv4 Client->PPPoE User

network.pppoe.password

String within 99

characters

Blank

Description:

Configures the password for PPPoE connection.

Example:

network.pppoe.password = yealink123

Note: It works only if the value of the parameter “network.ip_address_mode” is set to

0 (IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 1 (PPPoE). If you

change this parameter, the IP phone will reboot to make the change take effect.

Web User Interface:

Network->Basic->IPv4 Config->PPPoE->Password

Phone User Interface:

Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN

Port->IPv4->PPPoE IPv4 Client->PPPoE PWD

To configure PPPoE via web user interface:

1. Click on Network->Basic.

2. In the IPv4 Config block, mark the PPPoE radio box.

3. Enter the user name and password in corresponding fields.

4. Click Confirm to accept the change.

A dialog box pops up to prompt that settings will take effect after a reboot.

5. Click OK to reboot the phone.