Yealink SIP-T19 E2 [270/401] Descriptions web setting path

Yealink SIP-T29G [270/401] Descriptions web setting path
Yealink IP Phones Auto Provisioning Guide
260
Parameter
Permitted
Values
Descriptions
Web Setting Path
hold warning tone every 30 seconds when
there is a call on hold.
The default value is 30.
Note: It works only if the value of the
parameter features.play_hold_tone.enable
is set to 1 (Enabled).
features.redial_tone
Integer within
6 digits
It configures the IP phone to continue to play
the dial tone after inputting the preset
numbers in the pre-dialing screen.
Example:
features.redial_tone = 125
The IP phone will continue to play the dial
tone after inputting “125in the pre-dialing
screen.
If it is left blank, the IP phone will not play the
dial tone after inputting numbers in the
pre-dialing screen.
The default value is blank.
Features->Audio->Redial Tone
features.partition_tone
0 or 1
It enables or disables the IP phone with active
accounts to play tones in the dialing screen
differently from the IP phone with no active

Содержание

Похожие устройства