Yealink SIP-T19 E2 Инструкция по работе с сервером Autoprovision онлайн [68/401] 166998

Yealink IP Phones Auto Provisioning Guide



Create a new directory "ProvisioningDir_new" under the root directory of the

provisioning server.

The IP phone with old firmware does not support protecting personalized settings after

auto provisioning and upgrade. You can configure the value of the parameter

“auto_provision.custom.protect” to 1 in the configuration file to protect personalized

settings after auto provisioning and upgrade.

Do the following operations:

1. Place the configuration files (y000000000000.cfg and 001565221229.cfg) that you

want the IP phone to download to the new directory “ProvisioningDir_new” of the

provisioning server.

2. Add/Edit the following parameter in the y000000000000.cfg file or 001565221229.cfg

file you want the IP phone to download:

auto_provision.custom.protect=1

3. Create a blank configuration file “y000000000000.cfg” on the root directory of the

provisioning server and add the following parameters to this file.

#Configure the access URL of the firmware file.

firmware.url = tftp://192.168.1.211/2.73.0.1.rom

#Configure the access URL of configuration files.

auto_provision.server.url = tftp://192.168.1.211/ProvisioningDir_new

4. Trigger the IP phone to perform the auto provisioning process. For more information

on how to trigger auto provisioning process, refer to Configuring the Update Mode

on Page 45.

During auto provisioning, the IP phone first downloads the y000000000000.cfg file, and

then downloads firmware from the root directory of the provisioning server.

The IP phone reboots to complete firmware upgrade, and then starts auto provisioning

process again which is triggered by phone reboot (the power on mode is enabled by

default). It downloads the y000000000000.cfg and 001565221229.cfg files in sequence

from the new directory “ProvisioningDir_new” of the provisioning server. As no

001565221229-local.cfg file exists on the IP phone, the IP phone automatically generates

a 001565221229-local.cfg file which saves the personalized settings of the old firmware.

If your IP phone is running firmware version prior to 61, the IP phone can only recognize

the old (M1) configuration file for auto provisioning, so the blank configuration file

created above uses the M1 template.