Yealink TG100 [8/62] Ethernet line connection

NeoGate TG Series User Manual

8/62

2.3 Ethernet Line Connection

NeoGate provides two 10/100M Ethernet ports with RJ45 interface and LED

indicator. Plug Ethernet line into NeoGate’s Ethernet port, and then connect

the other end of the Ethernet line with a hub, switch, router, LAN or WAN. Once

connected, check the status of the LED indicator. A yellow LED indicates the port

is in 100M mode, if it’s dark, the speed is 10M. Green LED indicates the port is

properly connected, if it’s flickering, it means data transmission.

2.4 Power Supply Connection

NeoGate utilizes the high-performance switch power, which supplies enough

voltage and electrical energy required by NeoGate system.

AC Input: 100~240V

DC Output: 12V, 1A

Please follow the steps below to connect the NeoGate unit to a power outlet:

1. Connect the small end of the power cable to the power input port on the

NeoGate back panel, and plug the other end of the cable into a 100VAC power

outlet.

2. Check the Power LED on the front panel. A solid green LED indicates that

power is being supplied correctly.

3 Administrator Login

Open your Web browser and input the IP address of the NeoGate server.

If this is the first time you configure NeoGate, please use the default settings

below:

IP Address: http://192.168.5.150

Username: admin

Password: password

In this example, the IP address is 192.168.2.135, the model is TG800.