![Graco Pro-Shot 242056 [4/6] Service](/img/pdf.png)
Graco Pro-Shot 242056 [4/6] Service
![Graco Pro-Shot 24H404 [4/6] Service](/views2/1193162/page4/bg4.png)
Service
4 309032L
Service
Refer to Parts Drawing, page 5, for following instruc-
tions.
Disassembly
1. Relieve the pressure. See Pressure Relief Proce-
dure on page 3.
2. Check all parts thoroughly when disassembling and
carefully replace any worn or damaged parts.
3. Remove bottom seat adapter (10) from grease fun
body (9).
4. Remove acorn nuts (1) and bolts (17) from trigger
guard (12). Remove trigger guard (12).
5. Remove outlet adapter (7).
6. Remove hex nuts (5).
7. Remove yoke (16).
8. Remove rod guide (18) from grease gun body (9).
9. Push plunger rod (15) through seal (4). Be careful;
seat (14), ball (2), and copper gasket (6) will fall out
bottom.
10. Replace all parts included in service kit 243446.
11. Reassemble valve.
12. With trigger in free position tighten bottom nut (5)
until yoke bottoms out on rod guide (this is the max-
imum flow setting. (F
IG. 1) Back off nut approxi-
mately 1/8 turn. Hold bottom nut in place and
securely tighten top nut.
13. If additional adjustment is desired, follow adjustment
procedure on page 3.
14. For specific operational problems, see Trouble
Shooting.
Troubleshooting
To reduce the risk of serious injury after servicing
valve, always make sure the valve is in the closed
position with trigger released.
Problem Cause Solution
Grease Flows with trigger release
Damaged Ball Install Service Kit
Damaged Seat Install Service Kit
Out of Adjustment Readjust, see Adjustment, page 3
Missing Ball Install Service Kit
No grease flow when trigger pulled
Out of Adjustment Readjust, see Adjustment, page 3
Plugged Seat Clean seat
Disassembled Plunger and Rod Reassemble
Grease is leaking out of bottom of gun
Loose Bottom Adapter Tighten adapter (F
IG. 1)
Missing Copper Gasket Install Service Kit
Worn Copper Gasket Install Service Kit
Grease is leaking out of the top of gun Worn Seal in top of gun Install Service Kit
Short seal life Worn plunger rod Install Service Kit
Trigger will not move
Bent guard Replace guard
Bent pivot pin Install Service Kit
Damaged handle Replace trigger
Содержание
- Grease dispense valve 1
- Instructions 1
- Pro sho 1
- Warning 2
- Warnings 2
- Adjustment 3
- Operation 3
- Pressure relief procedure 3
- Back off nut approxi mately 1 8 turn hold bottom nut in place and securely tighten top nut 4
- Check all parts thoroughly when disassembling and carefully replace any worn or damaged parts 4
- Disassembly 4
- For specific operational problems see trouble shooting 4
- If additional adjustment is desired follow adjustment procedure on page 3 4
- Push plunger rod 15 through seal 4 be careful seat 14 ball 2 and copper gasket 6 will fall out bottom 4
- Reassemble valve 4
- Refer to parts drawing page 5 for following instruc tions 4
- Relieve the pressure see pressure relief proce dure on page 3 4
- Remove acorn nuts 1 and bolts 17 from trigger guard 12 remove trigger guard 12 4
- Remove bottom seat adapter 10 from grease fun body 9 4
- Remove hex nuts 5 4
- Remove outlet adapter 7 4
- Remove rod guide 18 from grease gun body 9 4
- Remove yoke 16 4
- Replace all parts included in service kit 243446 4
- Service 4
- To reduce the risk of serious injury after servicing valve always make sure the valve is in the closed position with trigger released 4
- Troubleshooting 4
- With trigger in free position tighten bottom nut 5 until yoke bottoms out on rod guide this is the max imum flow setting 4
- Technical data 5
- Copyright 1999 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revised december 2012 6
- For the latest information about graco products visit www graco com 6
- Graco headquarters minneapolis international offices belgium china japan korea 6
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa 6
- Graco information 6
- Graco standard warranty 6
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6928 or toll free 1 800 533 9655 fax 612 378 3590 6
Похожие устройства
- Graco Pro-Shot 242056 Сервис мануал
- Graco Pro-Shot 242057 Инструкция по эксплуатации
- Graco Pro-Shot 242057 Сервис мануал
- Graco Pro-Shot 242058 Инструкция по эксплуатации
- Graco Pro-Shot 242058 Сервис мануал
- Graco Pro-Shot 24H399 Инструкция по эксплуатации
- Graco Pro-Shot 24H399 Сервис мануал
- Graco Pro-Shot 24H400 Инструкция по эксплуатации
- Graco Pro-Shot 24H400 Схема сборки
- Graco Pro-Shot 24H401 Инструкция по эксплуатации
- Graco Pro-Shot 24H401 Схема сборки
- Graco Pro-Shot 24H402 Инструкция по эксплуатации
- Graco Pro-Shot 24H402 Схема сборки
- Graco Pro-Shot 24H403 Инструкция по эксплуатации
- Graco Pro-Shot 24H403 Схема сборки
- Graco Pro-Shot 24H404 Инструкция по эксплуатации
- Graco Pro-Shot 24H404 Схема сборки
- Graco Pro-Shot 24H405 Инструкция по эксплуатации
- Graco Pro-Shot 24H405 Схема сборки
- Graco Pro-Shot 24H406 Инструкция по эксплуатации