Graco C02025 [4/20] Warning

4 310543

WARNING

SKIN INJECTION HAZARD

Spray from the metering valve, hose leaks, or ruptured components can inject fluid into your body

and cause extremely serious injury, including the need for amputation. Splashing fluid in the eyes

or on the skin can also cause serious injury.

 Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate

surgical treatment.

 Do not point the metering valve at anyone or at any part of the body.

 Do not put your hand or fingers over the nozzle.

 Do not stop or deflect fluid leaks with your hand, body, glove, or rag.

 Do not “blow back” fluid; this is not an air spray system.

;pyy

 Follow the Pressure Relief Procedure on page 6 if the nozzle clogs, and before cleaning,

checking or servicing the equipment.

 Tighten all fluid connections before operating the equipment.

 Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immedi-

ately. Do not repair high pressure couplings; you must replace the entire hose.

 Fluid hoses must have spring guards on both ends, to help protect them from rupture caused by

kinks or bends near the couplings.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition

and result in a fire or explosion and serious injury.

 Ground the equipment and the object being sprayed. See Ground the System on page 5.

 Provide fresh air ventilation to avoid the buildup of flammable fumes from solvent or the fluid

being dispensed.

 Extinguish all the open flames or pilot lights in the dispense area.

 Electrically disconnect all the equipment in the dispense area.

 Keep the dispense area free of debris, including solvent, rags, and gasoline.

 Do not turn on or off any light switch in the dispense area while operating or if fumes are pres-

ent.

 Do not smoke in the dispense area.

 Do not operate a gasoline engine in the dispense area.

 If there is any static sparking while using the equipment, stop dispensing immediately. Identi-

fy and correct the problem.