Graco D200s [31/42] Disconnected solenoid diagnostic code screen

Remote DataTrak Operation

313526L 31

Disconnected Solenoid Diagnostic Code

Screen

See F

. 28. If the system detects a disconnected air

motor solenoid and the E4 Diagnostic Code is enabled,

the Disconnected Solenoid screen becomes active.

1. Press and release to exit the Disconnected

Solenoid screen.

2. Correct the condition causing the diagnostic code;

see T

ABLE

4, page 33.

3. This diagnostic code will automatically clear when

the system detects that the solenoid is connected.

Drum Low/Empty Diagnostic Code Screen

See F

. 29 and F

. 30. If the drum low/empty sensor

trips, the Drum Low or Drum Empty screen becomes

active, depending on which sensor setting is chosen,

see page 28.

1. Press and release to exit the Drum Low/Empty

screen. This will set the diagnostic code as a stand

ing diagnostic code. A standing diagnostic code has

not been cleared, simply acknowledged.

2. Replace the low or empty drum with a full drum.

When the sensor no longer detects a low or empty

drum the diagnostic code will clear automatically.

. 28: Disconnected Solenoid Diagnostic Code

Screen

. 29: Drum Empty Diagnostic Code Screen

. 30. Drum Low Diagnostic Code Screen