Moxa PT-508-2MTRJ-48 [99/109] Using https ssl

Moxa Managed Ethernet Switches Featured Functions

3-87

Using Syslog

The Syslog function provides the event logs for the syslog server. The function supports 3 configurable syslog

servers and syslog server UDP port numbers. When an event occurs, the event will be sent as a syslog UDP

packet to the specified syslog servers.

Syslog Server 1/2/3

Setting Description Factory Default

IP Address Enter the IP address of Syslog server 1/2/3, used by your

network.

None

Port Destination

(1 to 65535)

Enter the UDP port of Syslog server 1/2/3. 514

NOTE

The following events will be recorded into the Moxa switch’s Event Log table, and will then be

sent to the

specified Syslog Server:

•

Cold start

•

Warm start

•

Configuration change activated

•

Power 1/2 transition (Off (On), Power 1/2 transition (On (Off))

•

Authentication fail

•

Topology changed

•

Master setting is mismatched

•

Port traffic overload

•

dot1x Auth Fail

•

Port link off/on

Using HTTPS/SSL

To secure your HTTP access, the Moxa switch supports HTTPS/SSL to encrypt all HTTP traffic. Perform the

following steps to access the Moxa switch’s web browser interface via HTTPS/SSL.

1. Open Internet Explorer and type https://{Moxa switch’s IP address} in the address field. Press Enter

to establish the connection.