Moxa PM-7200-6SSC [14/155] Auth tacacs

Moxa PT-510-MM-ST-HV [14/155] Auth tacacs
Moxa Command Line Interface (FW_4.x) Commands
2-5
Command
Modes
Router configuration mode as OSPF
Usage
Guidelines
N/A
Examples
PT-7828(config-ospf)# area 1.1.1.1 virtual-link 0.0.0.0
Error messages Configuration Error!!
Related
commands
show ip ospf
auth tacacs+
Use the auth tacacs+ global configuration command on the switch to enable TACACS+ authentication. Use
the no form of this command to return to the default setting.
Commands
auth tacacs+
no auth tacacs+
Syntax
Description
auth Configure authentication mechanism
tacacs+ TACACS+ authentication
Defaults The default setting is disabled.
Command
Modes
Global configuration
Usage
Guidelines
N/A
Examples
PT-7828(config)# auth tacacs+
Error
messages
N/A
Related
commands
show auth tacacs+
auth tacacs+ auth-type
Use the auth tacacs+ auth-type global configuration command on the switch to specify the type of TACACS+
authentication. Use the no form of this command to return to the default setting.
Commands
auth tacacs+ auth-type { ascii | pap | chap | arap | mschap }
no auth tacacs+ auth-type
Syntax
Description
auth Configure authentication mechanism
tacacs+ TACACS+ authentication
auth-type Specify the authentication type
ascii Normal ASCII code authentication
pap Password Authentication Protocol
chap Challenge-handshake authentication protocol
arap AppleTalk Remote Access Protocol
mschap Microsoft Challenge-handshake authentication protocol
Defaults Default type is ASCII code authentication
Command
Modes
Global configuration
Usage
Guidelines
To enable the TACACS+ authentication, the command auth tacacs+must be executed first.

Содержание

Похожие устройства

Скачать