Moxa IMC-101G-IEX [7/14] Attention

- 7 -

ATTENTION

Saf

ety First!

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum

allowed current

for each wire size. If the current goes

above the

allowed maximum

, the wiring could overheat, causing

serious damage to your equipment.

You should also pay attention to the following points:

• Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the point of intersection.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

• You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

• Keep input wiring and output wiring separated.

• It is strongly advised that you label wiring to all devices in the system

when necessary.

Grounding the IMC-101G

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

grounding screw to the grounding surface before connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.