Moxa PTC-101-M-LC-HV Технические характеристики онлайн
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa PTC-101-M-LC-HV Технические характеристики онлайн

Moxa PTC-101-M-LC-HV Технические характеристики онлайн
Ethernet Media Converters and Extenders
1
www.moxa.com
Introduction
The PTC-101 Ethernet-to-fiber media converters convert from
10/100BaseT(X) to 100BaseFX. Models are available with either SC,
ST, or LC connectors. The PTC-101 converters eliminate the need
for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x
protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing
Specifications
to provide a total solution for your industrial Ethernet networks. The
PTC-101 is compliant with essential sections of EN 50155, covering
operating temperature, power input voltage, surge, ESD, and vibration,
as well as conformal coating and power insulation, making the
switches suitable for a variety of industrial applications.
IEC 61850-3 and railway Ethernet-to-fiber media converters
PTC-101 Series
› 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
› Link Fault Pass-Through (LFP)
› Power failure alarm by relay output (LV model only)
› -40 to 85°C operating temperature range
› Redundant dual DC power inputs (LV model only)
› Integrated high-reliability power supply eliminates the need for
external power transformer
› Compliant with EN 50121-4
› Essential compliance with EN 50155*
*Moxa defines “essential compliance” to include those EN 50155 requirements
that make products more suitable for rolling stock railway applications.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
Interface
RJ45/M12 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST/LC connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches:
DIP No. Function ON OFF
1
Auto Negotiation Enable Disable
2
Force TP Speed 100 Mbps 10 Mbps
3
Force TP Duplex Full Duplex Half Duplex
4
Link Fault Pass Throuth Enable Disable
5
Operating Mode Store-and-Forward Pass Through
The default setting for all DIP switches is ON.
Alarm Contact: One relay output with current carrying capacity of 1 A
@ 24 VDC (LV model only)
Optical Fiber
100BaseFX
Multi-Mode Single-Mode
Fiber Cable Type OM1
50/125 μm
G.652
800 MHz*km
Typical Distance
4 km 5 km 40 km
Wave-
length
Typical (nm) 1300 1310
TX Range (nm) 1260 to 1360 1280 to 1340
RX Range (nm) 1100 to 1600 1100 to 1600
Optical
Power
TX Range (dBm) -10 to -20 0 to -5
RX Range (dBm) -3 to -32 -3 to -34
Link Budget (dB) 12 29
Dispersion Penalty (dB) 3 1
Note: When connecting a single-mode fiber transceiver, we recommend
using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as
follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
Weight:
Product only: 690 g (1.52 lb)
Packaged: 875 g (1.92 lb)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Conformal Coating: Available upon request

Содержание

Похожие устройства

Скачать