Moxa CP-112UL-DB9M [2/2] Mkdir cdrom
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa CP-112UL-DB9M [2/2] Mkdir cdrom

Moxa CP-114UL-I-T [2/2] Mkdir cdrom
– 4 – – 5 – – 6 –
www.moxa.com/support
The Americas:
+1-714-528-6777 (toll-free: 1-888-669-2872)
Europe:
+49-89-3 70 03 99-0
Asia-Pacific:
+886-2-8919-1230
China:
+86-21-5258-9955 (toll-free: 800-820-5036)
2014 Moxa Inc. All rights reserved.
5. If you see a warning that the software has not passed Windows
Logo testing, select Continue Anyway.
6. After the driver software has been installed, the installation
wizard will guide you through the port installation, starting
with port 0. Be sure to install the software from the
\CP-114UL\Software\Windows 2K folder on the CD.
7. To verify successful installation, use Windows Device
Manager and check under Multi-port serial adapters and
Ports (COM & LPT) for any special marks, such as a question
mark or exclamation point.
Linux (32-bit/64-bit)
Ensure that you are logged into the machine with superuser (root)
privileges. Insert the Moxa driver CD-ROM into the CD-ROM drive.
If necessary, use the mkdir command to create a mount point for
the CD-ROM. The following command creates a mount point in the
directory /cdrom; you can mount the CD-ROM at any location in
the machine’s local file system.
mkdir /cdrom
The commands in the steps below assume the CD-ROM is mounted
at /cdrom. If you mount the CD-ROM at a different location, use
that location when issuing commands.
Mount the CD-ROM drive by entering the following command:
# mount -t iso9660 -o ro /dev/cdrom /cdrom
1. Execute the following commands from the Linux prompt:
#mount /dev/cdrom /mnt/cdrom
#cd /
#mkdir moxa
#cd moxa
#cp /mnt/cdrom/<driver directory>/mxser.tgz .
#tar xvfz mxser.tgz
#cd mxser
#make clean; make install
#cd /moxa/mxser/driver
#./msmknod
#modprobe mxser
2. Use the Moxa diagnostic utility to verify the driver status:
#cd /moxa/mxser/utility/diag
#./msdiag
3. Use the Moxa terminal utility to test the TTY ports:
#cd /moxa/mxser/utility/term
#./msterm #./msterm
Pin Assignments and Cable Wiring
The CP-112UL series has a female DB25 connector on the board.
Cables with different connectors are available to help you connect
your device to the board.
Male DB9 (CBL-M25M9x2-50)
Pin RS-232 RS-422
RS-485
4-wire
RS-485
2-wire
1
DCD
TxD-(A)
–
2
RxD
TxD+(B)
–
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
The CP-114UL series has a female DB44 connector on the board.
Cables with different connectors are available to help you connect
your device to the board.
Male DB9 (CBL-M44M9x4-50)
Pin RS-232 RS-422
RS-485
2-wire
1
DCD
TxD-(A)
–
2
RxD
TxD+(B)
–
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
Male DB25 (CBL-M44M25x4-50)
Pin RS-232 RS-422
RS-485
4-wire
RS-485
2-wire
2
TxD
RxD+(B)
RxD+(B)
Data+(B)
3
RxD
TxD+(B)
TxD+(B)
–
4
RTS
–
–
–
5
CTS
–
–
–
6
DSR
–
–
–
7
GND
GND
GND
GND
8
DCD
TxD-(A)
TxD-(A)
–
20
DTR
RxD-(A)
RxD-(A)
Data-(A)

Содержание

Похожие устройства

Скачать