Moxa V2403-C2-W-T [11/11] Configuring the ethernet interface

- 11 -

LAN 2

192.168.4.127

255.255.255.0

Configuring the Ethernet Interface

Linux users should follow these steps:

If you use the console cable to configure network settings for the first

time, use the following commands to edit the interfaces file:

#ifdown –a

//Disable LAN1~LAN2 interface first, before you

reconfigure the LAN settings. LAN1 = eth0, LAN2 = eth1//

#vi /etc/network/interfaces

//check the LAN interface first//

After the boot setting of the LAN interface has been modified, use the

following commands to immediately activate the LAN settings:

#sync; ifup –a

W7E users should follow these steps:

STEP 1:

Go to Start



Control Panel



Network and Internet



View

network status and tasks

 Change adapter setting.

STEP 2:

In the Local Area Connection Properties screen, click Internet

Protocol (TCP/IP) and then select Properties. Select Internet

Protocol Vers

ion 4, and then click Properties.

STEP 3:

Click OK after inputting the proper IP address and netmask.

NOTE

Refer to the V2403 user’s manuals for additional configuration

information.