Moxa DA-683-DPP-T-W7E [21/47] Connecting usb devices

DA-683 Hardware Hardware Installation

2-11

ATTENTION

Note that without the Y-type cable, the PS/2 connector on the DA-683 can only work with a PS/2

keyboard. A PS/2 mouse will not function when directly connected to the PS/2 connector on the DA-683

embedded computer.

Connecting USB Devices

The DA-683 embedded computer has four USB 2.0 ports: two are on the front panel, and two are on the rear

panel. All of the ports are UHCI, Rev 2.0 compliant and support Plug & Play and hot swapping. These ports can

be used to connect USB devices, such as a keyboard, mouse, USB flash disk, and USB CD-ROM. In addition,

both USB ports support system boot up, which can be activated by modifying the BIOS settings. The chapter

“BIOS Setup” describes the configuration process in detail.

Connecting LAN Ports

The DA-683 has 6 10/100/1000 Mbps LAN ports. When the cable is properly connected, the LEDs on the RJ45

connectors will glow to indicate a proper connection.