Moxa DA-662A-8-LX [11/17] Led indicators

DA-662A Series Hardware Hardware Introduction

2-4

DA-662A-16

LED Indicators

LED indicators are located on the front panel of the DA-662A series.

LED Name LED Color LED Function

Ready Red Power is On, and system is ready (after booting up)

LAN1, LAN2,

LAN3, LAN4

Orange 10 Mbps Ethernet connection

Green 100 Mbps Ethernet connection

P1-P16 (Rx)

Orange Serial port is receiving RX data from the serial device

Off Serial port is not receiving RX data from the serial device

P1-P16 (Tx)

Green Serial port is transmitting TX data to the serial device

Off Serial port is transmitting TX data to the serial device

Reset Button

Press the Reset button on the front panel continuously for at least 5 seconds to load the factory default

configuration. After the factory default configuration has been loaded, the system will reboot automatically.

The Ready LED will blink on and off for the first 5 seconds, and then maintain a steady glow once the system

has rebooted.

We recommend that you only use this function if the software is not working properly and you want to load

factory default settings. To reset an embedded Linux system, always use the software reboot command

/>reboot to protect the integrity of data being transmitted or processed. The Reset button is not designed to

hard reboot the DA-662A series.

ATTENTION

Pressing the Reset button will only load the configuration file. All files in the /etc directory will revert to their

factory defaults, and

all user data in the Flash ROM will be deleted.