Moxa UC-7110-LX [10/46] Connecting the uc 7101 7110 7112 to a pc

UC-7101/7110/7112 Software User’s Manual Getting Started

2-2

Powering on the UC-7101/7110/7112

Connect the SG wire to the Shielded Contact located on the upper left corner of the

UC-7101/7110/7112, and then power on the UC-7101/7110/7112 by connecting the power adaptor.

It takes about 16 seconds for the system to boot up. Once the system is ready, the Ready LED will

light up.

ATTENTION

After connecting the UC-7101/7110/7112 to the power supply, it will take about 16 seconds for

the operating system to boot up. The green Ready LED will not turn on until the operating system

is ready.

Connecting the UC-7101/7110/7112 to a PC

There are two ways to connect the UC-7101/7110/7112 to a PC.

Console Port

The serial console port offers users a

convenient means of connecting to the

UC-7101/7110/7112. This method is

particularly useful when using the

UC-7101/7110/7112 for the first time. Since

the communication is over a direct serial

connection, you do not need to know either

of the IP addresses in order to make contact.

Use the serial console port settings shown on

the right. Once the connection is established,

the window below will open.

Serial Console Port Settings

Baudrate

19200 bps

Parity

None

Data bits

Stop bits

Flow Control

None

Terminal

VT100