Moxa UC-8132-T-LX [12/23] Placement options

UC-8112-ME-T Series Hardware Introduction

2-5

WARNING

There is a risk of explosion if the battery is replaced

with an incorrect battery type.

Placement Options

There are two sliders on the back of the unit for DIN rail and wall mounting.

DIN-Rail Mounting

1. Attach the DIN-rail mounting kit on the rear panel of the UC-8112-ME-T as shown in the following

illustration. Make sure that the two screws are securely fastened.

NOTE

Test the screw head and shank size by inserting the screw into one of the keyhole shaped apertures of the

wall

-mounting plates before attaching the plate to the wall.

2. Pull down the bottom slider of the DIN-rail bracket located at the back of the unit

3. Insert the top of the DIN rail into the slot just below the upper hook of the DIN-rail bracket.

4. Latch the unit firmly on to the DIN rail as shown in the illustrations below.

5. Push the slider back into place.