M-Audio Evolution MK-261 Инструкция по эксплуатации онлайн [4/6] 18883

11. PROGRAM & BANK CHANGE MEMORY

You can assign a selected PROGRAM CHANGE as well as a BANK LSB and a BANK MSB to one of ten numeric keys (0-

9). Once stored, simply pressing one of the numeric keys will send the desired PROGRAM and BANK CHANGES.

11-1 Select the desired PROGRAM CHANGE, BANK LSB and MSB. Please refer to respective chapters for

information on how to do this.

11-2 Press the MEMORY switch. The LED starts to flash.

11-3 Press the numeric key (from 0 to 9) you wish to assign the data to. The PROGRAM and BANK CHANGE

information is stored on the selected numeric key.

12. Selecting a VELOCITY CURVE

The VELOCITY CURVEs determine the relationship between how hard the keys are struck and the corresponding velocity

that the unit transmits.

This unit allows you to select from 12 VELOCITY CURVEs.

12-1 Simultaneously press the WHEEL ASSIGN and CHANNEL switches. The LED starts to flash showing the current

number of the VELOCITY CURVE.

12-2 Press one of the numeric keys to select a VELOCITY CURVE. The 10 key numbers correspond to the first 10

VELOCITY CURVEs as follows:

You can also use the “+” or “-” switches to access all the VELOCITY CURVEs.

There are 3 Fixed VELOCITY CURVEs which output the following velocity values:

Curve Velocity

F 0

F 1

F 2

100

127

Note: If you don’t do anything for 5 seconds the LED stops flashing and shows the current PROGRAM CHANGE

number.

13. RESET-ALL CONTROLLERS

This function allows you to send a RESET-ALL CONTROLLERS message to connected equipment.

13-1 Press MEMORY and X’POSER switches simultaneously.

Hold the keys down for at about 2 seconds, then the reset message is sent.

14. GENERAL MIDI MODE RESET

This function allows you to send a GENERAL MIDI MODE RESET message.

14-1 Press the GM RESET key.

Hold the key down for at about 2 seconds, then the reset message is sent.

15. SPECIFICATIONS

1. Keyboard: 61 standard keys (Velocity sensitive)

2. Control: Switches: (WHEEL, CHANNEL, PROGRAM, MEMORY, X’POSER, GM RESET, VEL CURVE, BANK L,

BANK M, RESET-AC, OCTAVE DOWN, OCTAVE UP, POWER ON/OFF, Numeric Keys (0-9), −, +)