Moxa TC-6110-T-LX Руководство по быстрой установке онлайн [5/7] 171053

- 5 -

When installing TC-6110 computers at a field site, follow these steps:

Step 1: Connect the ends of the extended power switch cable to the male

portion of the 2-pin Euroblock (provided); you may also choose to not use

the cable extender, and connect the switch to the terminal directly.

Step 2: Plug the male Euroblock into the matching female terminal on the

front panel.

Step 3: Make sure the power switch is turned off (Open).

Step 4: Connect the earth/ground cable to the

Phillips

-head ground connector on the

lower right corner

of the

front panel.

Step 5: Connect the M12 connector to the power source using the pin

assignment at right.

Step 6: Connect this M12 connector to power input 1 on the front panel of

the computer.

Step 7: Use the same method to provide power to power input 2.

Step 8: Turn on the computer. If the power supply is connected properly,

the Power and System Power LEDs will be on, and the yellow Ready

LED will also be on. If you need to disconnect the power, reverse these

steps.

Please note that the branch circuit over current protection must be rated

maximum 10 A.