M-Audio Fineline [6/16] Mono mic switch mic 1 2 3 4 outputs

Turning a send pot all the way down will prevent any of that signal from

appearing at the Send mix Output, while turning it all the way up will

send it out the Send mix Output with 6 dB of gain.

Mono Mic Switch & MIC 1,2/3,4 Outputs

With the Mono Mic switch located on the back of FineLine in the Off posi-

tion, the four XLR microphone inputs and the two Mic outputs are inde-

pendent of the rest of the FineLine mixer.

When the MIC 3,4 Output is used and nothing plugged into the MIC 1,2

Output, all four microphones are mixed monaurally according to the lev-

els set by the corresponding four front panel MIC pots. This mixed mono

signal appears at the MIC 3,4 Output.

When a cable is plugged into the MIC 1,2 Output, microphones 1 and 2

will only appear at the MIC 1,2 Output, while microphones 3 and 4 will

only appear at the MIC 3,4 Output.

When the Mono Mic switch is turned On, the signal at the MIC 3,4 Output

is additionally routed to both the Left and Right main Outputs.

Signal levels of all four microphones are summed together and monitored

by the two Mic indicator LEDs which show signal presence and clipping

level.

Power Indicator

FineLine runs on 9 to 12 volts AC. Whenever FineLine is plugged in the

Power LED should remain lit. If the Power LED goes off check to make

sure your wall supply is properly plugged in and powered.