Moxa MD-124Z [23/33] Picture pip adjustments

MD-124 HW Manual On-screen Display and Display Configuration

B-8

Display-Picture-Color

This only applies to video signals configured as the Main Source. This increases/decreases the overall color

saturation, and can be used if incoming signals lack strong colors, as sometimes happens with older equipment or

bad cables. Note that this function can also make noisy color signals appear crisper/clearer if color is rolled back

closer to grayscale. The recommended levels are the factory default, which are set to a neutral and a normalized

level.

Scale is from 0-100. 50 is the default.

Display-Picture-Tint

This only applies when analog Composite/S-VHS NTSC video signals have been configured as the Main Source.

This increases/decreases the overall video tint. This will adjust all colors brighter or darker, making the image more

“washed out” or stronger in terms of color intensity. This setting may be used if the incoming signal from older

equipment or bad cabling lacks strong colors. The recommended level is the factory default, which is set to neutral.

Scale is from 0-100. 50 is the default.

Picture: PIP Adjustments

Display-Picture-PIP/POP Adjust-PIP Size

To enable this function, please see Display-Source-PIP-xxxx and Display-Source-PBP-xxx, below. This

increases/decreases the Picture-In-Picture window sizes. These functions will allow any of the signal inputs to be

placed as an real time window overlay (or side by side if using PBP) on top of the current Main Source signal

enabling the main feature of the Maritime Multi Display functionality.

Display-Picture-PIP/POP Adjust/H Position

To enable this function, please see Display-Source-PIP-xxxx and Display-Source-PBP-xxx, below.

This adjusts the horizontal (left/right) position of the real time window overlay.

Scale is from 0-100. 0 is default.

Display-Picture-PIP/POP Adjust/V Position

To enable this function, please see Display-Source-PIP-xxxx and Display-Source-PBP-xxx, below.

This adjusts the vertical (up/down) position of the real time window overlay.

Scale is from 0-100. 0 is default.

Display-Picture-PIP/POP Adjust-PIP Picture-Brightness

To enable this function, please see Display-Source-PIP-xxxx and Display-Source-PBP-xxx, below.

This increases/decreases the overall brightness of the window overlay. This will not change the brightness of the

Main Source signal behind the window overlay. It can be used for situations where the incoming video signal from

CCTV or other video sources appears dark in comparison to the source signal.

Scale is from 0-100. 50 is the default.