Moxa W315A-LX [10/74] Serial console

Moxa W406-T-LX [10/74] Serial console
W315A/325A Linux User's Manual Getting Started
2-2
Powering on the W315A/325A
Connect the SG wire to the shielded contact located on the left of the W315A/325A’s top panel, and then power
on the computer by connecting it to the power adaptor. It takes about 30 to 60 seconds for the system to boot
up. Once the system is ready, the Ready LED will light up.
NOTE
After connecting the W315A/325A to the power supply, it will take about 30 to 60 seconds for the operating
system to boot up. The green Ready LED will not turn on until the operating system is ready.
ATTENTION
This product is intended to be supplied by a Listed Power Unit and output marked with “LPS and rated 12-
48
VDC, 1.2 A (minimum requirements).
Connecting the W315A/325A to a PC
There are two ways to connect the W315A/325A to a PC: through the serial console port or by SSH Console
over the network.
Serial Console
The serial console gives users a convenient way of connecting to the W315A/325A. This method is particularly
useful when using the computer for the first time, or when you do not know either of the W315A/325A’s two IP
addresses.
Use the serial console port settings shown below.
Baudrate 115200 bps
Parity None
Data bits 8
Stop bit 1
Flow Control None
Terminal VT100
Once the connection is established, the following window will open.

Содержание

Похожие устройства

Скачать