![Moxa W406-T-LX [19/24] Connecting the power](/img/pdf.png)
Moxa W406-T-LX [19/24] Connecting the power
![Moxa W406-T-LX [19/24] Connecting the power](/views2/1200680/page19/bg13.png)
W321/341 Hardware Setting Up the W321/341
3-4
Connecting the Power
Connect the “live-wire” end of the 12-48 VDC power adapter to the embedded computer’s terminal block. When
power is properly supplied, the Ready LED will glow a solid green after a 30-to-60 second delay.
Grounding the Unit
Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Before
connecting any devices, run a ground wire from the ground screw to the grounding surface.
ATTENTION
This product should be mounted to a well
-grounded mounting surface such as a metal panel.
SG:
The
Shielded Ground
(sometimes called Protected Ground) contact
is the left most contact of the 3
-
pin power terminal block connector,
as viewed from the angle shown here. Connect the SG wire to an
appropriate grounded metal surface.
Connecting Data Transmission Cables
This section describes how to connect cables for the network, serial devices, and serial COM terminal.
Connecting to the Network
Plug your network cable into the embedded computer’s Ethernet port. The other end of the cable should be
plugged into your Ethernet network. When the cable is properly connected, the LEDs on the embedded
computer’s Ethernet port will glow to indicate a valid connection.
The 10/100 Mbps Ethernet LAN port uses 8-pin RJ45 connectors. The following diagram shows the pinouts for
these ports.
The LED indicator
on the right glows a solid green color when
the cable is properly connected to a 100 Mbps Ethernet
network. The LED will flash on and off when Ethernet packets
are being transmitted or received.
The LED indi
cator on the left glows a solid orange color when
the cable is properly connected to a 10 Mbps Ethernet network.
The LED will flash on and off when Ethernet packets are being
transmitted or received.
Pin Signal
1 ETx+
2 ETx-
3 ERx+
4 ---
5 ---
6 ERx-
7 ---
8 ---
Connecting to the WLAN
The wireless embedded computer is WLAN ready and includes an 802.11 b/g/n WLAN module. It supports WEP,
WPA and WPA2 data encryption. To verify WLAN operation, first configure your WLAN settings on the
embedded computer using the serial console or a wired network connection. Please refer to the software user’s
manual for further detail.
Содержание
- Eighth edition april 2013 1
- W321 341 series compact computers hardware manual 1
- Www moxa com product 1
- Copyright notice 2
- Disclaimer 2
- Technical support contact information 2
- Trademarks 2
- W321 341 series compact computers hardware manual 2
- Www moxa com support 2
- Table of contents 3
- Introduction 4
- Overview 5
- Package checklist 5
- Product features 5
- W321 341 hardware introduction 5
- W321 lx 5
- W341 lx 5
- Computer 6
- Ethernet interface 6
- Product hardware specifications 6
- Storage 6
- W321 341 hardware introduction 6
- Wlan interface 6
- Environmental limits 7
- Physical characteristics 7
- Serial communication parameters 7
- Serial interface 7
- Serial signals 7
- Switches and buttons 7
- W321 341 hardware introduction 7
- Power requirements 8
- Reliability 8
- Standards and certifications 8
- W321 341 hardware introduction 8
- Warranty 8
- Hardware block diagram 9
- W321 341 hardware introduction 9
- Hardware features 10
- Appearance 11
- Bottom view 11
- Front view 11
- Top view 11
- W321 341 hardware hardware features 11
- Bottom view 12
- Front view 12
- Top view 12
- W321 341 hardware hardware features 12
- Dimensions 13
- W321 341 hardware hardware features 13
- Attention 14
- Led indicators 14
- Reset button 14
- W321 341 hardware hardware features 14
- Attention 15
- Real time clock 15
- W321 341 hardware hardware features 15
- Setting up the w321 341 16
- Installing the w321 341 17
- W321 341 hardware setting up the w321 341 17
- Wall or cabinet mounting 17
- Attention 18
- Din rail mounting 18
- W321 341 hardware setting up the w321 341 18
- Wiring requirements 18
- Attention 19
- Connecting data transmission cables 19
- Connecting the power 19
- Connecting to the network 19
- Connecting to the wlan 19
- Grounding the unit 19
- W321 341 hardware setting up the w321 341 19
- Connecting to a serial device 20
- Serial console port 20
- W321 341 hardware setting up the w321 341 20
- Sd slot 21
- W321 341 hardware setting up the w321 341 21
- Digital input output channels w321 only 22
- W321 341 hardware setting up the w321 341 22
- Relay output w341 only 23
- Usb w341 only 23
- W321 341 hardware setting up the w321 341 23
- A regulatory approval statement 24
- Regulatory approval statement 24
- Warning 24
Похожие устройства
- Moxa W406-T-LX Руководство по аппаратной части
- Moxa W406-T-LX Технические характеристики
- Moxa W406-T-LX Руководство по программной части
- Moxa W406-T-LX Руководство по работе с утилитой Moxa Device Manager
- Moxa W406-CE Инструкция по эксплуатации
- Moxa W406-CE Руководство по аппаратной части
- Moxa W406-CE Технические характеристики
- Moxa W406-CE Руководство по программной части
- Moxa W406-CE Руководство по работе с утилитой Moxa Device Manager
- Moxa W406-T-CE Инструкция по эксплуатации
- Moxa W406-T-CE Руководство по аппаратной части
- Moxa W406-T-CE Технические характеристики
- Moxa W406-T-CE Руководство по программной части
- Moxa W406-T-CE Руководство по работе с утилитой Moxa Device Manager
- Moxa ISD-1110-T Инструкция по эксплуатации
- Moxa ISD-1110-T Технические характеристики
- Moxa ISD-1130-T Инструкция по эксплуатации
- Moxa ISD-1130-T Технические характеристики
- Moxa ISD-1210-T Инструкция по эксплуатации
- Moxa ISD-1210-T Технические характеристики