M-Audio Dman 2044 [11/36] Verifying the software installation

3. Click OK to install the DMAN 2044 driver software from the provid-

ed Windows 95 Driver/Installation diskette.

4. You will then be prompted for the Windows 95 Driver & Installation

diskette (see figure below). Place the diskette into the A: drive and

click OK. (Your system may require you to use the B: drive instead.)

Windows 95 Prompts for Diskette

5. The Windows 95 Plug-and-Play system will automatically install the

proper software driver components and configure the drivers to

match the current hardware settings of the DMAN 2044. With some

systems, you will be required to restart Windows 95 after the driver

installation is complete.

6. If the installation completes without any resource conflicts, the

DMAN 2044 is ready for immediate use.

Windows 98 Driver & Utility Installation

1. After physical installation of the DMAN 2044 card, boot your comput-

er system and start Windows 98.

2. As the computer enters Windows 98, it will automatically detect the

DMAN 2044’s presence in your computer. An "Insert Disk" dialog

box will appear, prompting you to insert the Drivers/Utilities

diskette. Insert the disk labeled "DMAN 2044 DRIVERS, PC Format"

into your 3.5" floppy drive, and click OK.

3. Windows will then inform you that it is installing software for your

new hardware. Reboot your system if prompted. The DMAN is

ready for immediate use.

Verifying the Software Installation

At this point, you should verify that the software drivers and utilities

have been properly installed. Follow these steps:

1. Click on the Windows Start button. Then select Settings | Control

Panel to make the Windows Control Panel appear (see figure below).