M-Audio Delta TDIF Инструкция по эксплуатации онлайн [21/58] 19006

PAN: Each mixer input may be individually panned anywhere in the stereo

output mix. A pan control is positioned directly under each input channel

peak meter and has the appearance of a small vertical pointer. To make a

coarse adjustment, click on the pan control with your mouse and drag it to

the desired position. For finer adjustment (in 1% increments), you may

click on the pan control to make it active, and then use the left/right or

up/down cursor keys on your computer keyboard. Either way, while the

pan setting is being adjusted, its value will appear numerically in the

Master Volume’s status box (below the Master Volume Stereo Link control)

as a percentage from left pan to right pan: -100% represents far left, +100%

represents far right, and 0% represents the center.

SOLO: Each mixer input channel has a "Solo" checkbox associated with it.

Clicking on and activating a Solo box will solo the selected channel by

essentially muting all other signals. When more than one channel has

Solo selected, all solo channels will be summed to the solo ‘buss’ (path),

which is what one might consider an ‘in place’ solo as opposed to a PFL,

or pre-fader listen (levels and pans still apply). Deactivating all solo

boxes will return all input channels to their previous mute/unmute

states.

MUTE: Every mixer input channel has a "Mute" checkbox associated with

it. Clicking on and activating the Mute box will remove that signal from

the stereo buss. Deactivating the Mute box will add the signal back into

the stereo buss.

STEREO LINK: All input channel pairs have a "Stereo Link" capability.

Clicking on and activating the Stereo Link checkbox will link (or "link")

the left/right faders so that both channels may be adjusted together as a

stereo pair.

Patchbay/Router Page

The Patchbay/Router page allows you to connect each of the Delta

TDIF’s hardware outputs (4 pairs of TDIF outputs and 1 pair of analog

output channels that is identical to the S/PDIF digital output) to specific

audio sources within the Delta TDIF board. To display this page, click the

"Patchbay/Router" tab of the Delta Control Panel.

ON THE MAC: Please substitute the name “SM/ASIO” where

referrences are made to “WavOut.” SM/ASIO are the software outputs

on the Mac, while WavOut are the software outputs on the PC.

The leftmost vertical column of Patchbay/Router page, "H/W Out 1/2,"

connects this TDIF stereo pair to one of eight stereo sources: